Figured I might get a quick answer here since the instructions on TurboXS's website is for an older version of the kit, and the color by numbers instructions with the kit were no help....

The toggle switch has 2 prongs with no identifying markings. I've grounded the boost controller already, and ran the single red wire into the cabin. Don't know which prong to wire from the DSBC and what to do with the remaining prong. I don't want to assume anything, I just want to do it correctly.

Any ideas?

 

it doesn't matter which terminal you connect it to. the 2nd terminal goes to a 12V power source.

 

Makes sense, since the 2nd solenoid is all that would need power so it can switch over.