ok... this forum has so much information that i'm lost. i have a couple simple questions i'll make as short as possible.

all the wiring (harness, indash, etc...) are out of an AUTOMATIC 94 del sol S.

there is now a JDM manual P72 ECU.

i go to wire up my IAB and i see a green wire with a black strip in the A17. i figure, that's probably the automatic wire from the P05, P06, or P07...

now... i know in the picture below, that green and black wire is for the reverse wire. but there is another green/black wire that isn't pictured that was once connected to the automatic shifter i think... is that what A17 is?

and by the way, which of those wires that were once there pin directly to the ecu. ie) A11- This is EGR Control Solenoid Valve (if the ECU has) Red. something like that.... thanks a million. be nice if i had a p06 automatic pinout