temp

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rex-Si &raquo;</TD></TR><TR><TD CLASS="quote">

Thats why I found and posted the diagram. I figured he would print it and compare. He deff. has a few issues that need to be fixed. I'm thinking he needs to get it all routed right to fix the problem THEN work on finding out what lines he can do without. I think other ppl telling he does not need things is gonna confuse this kid.
Later,
</TD></TR></TABLE>

yeah i could tell by the first pic that the dashpot was off.

Rex-Si

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by temp &raquo;</TD></TR><TR><TD CLASS="quote">

yeah i could tell by the first pic that the dashpot was off.</TD></TR></TABLE>

Yeah , well I think he's got all he needs to fix the problem so i'm outa this thread.

tigueremalo

so i dont have to remove the dashpot if i block off all the charcoal canister lines correct but remember that my dashpot is not the same as the one shown in the pic that TEMP posted if you look correctly so i think hats what ******* me up so should i remove it???

temp

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tigueremalo &raquo;</TD></TR><TR><TD CLASS="quote">so i dont have to remove the dashpot if i block off all the charcoal canister lines correct but remember that my dashpot is not the same as the one shown in the pic that TEMP posted if you look correctly so i think hats what ******* me up so should i remove it???</TD></TR></TABLE>

the dashpot is a GOOD thing. it looks like your vacuum lines are not setup right at all.

tigueremalo

yeah i think so too ill double and post back because the dashpot that TEMP posted up the dashpot on there only has one nipple but mines has two by the way if cap it off would it still work??

temp

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tigueremalo &raquo;</TD></TR><TR><TD CLASS="quote">yeah i think so too ill double and post back because the dashpot that TEMP posted up the dashpot on there only has one nipple but mines has two by the way if cap it off would it still work??</TD></TR></TABLE>

dude, get the shop manual vacuum diagram. FROM THERE, make sure your lines match that exactly, you should not have any "extra" nipples that have no hoses.

tigueremalo

ok ok ok here goes





i hope the pics are betta i adjusted the wire that comes from the gas pedal to the intake manifold i removed the dashpot bla bla bla you see the pic

and here is what i did!!!!!

charcoal canister still in


Modified by tigueremalo at 5:05 PM 6/13/2006