NHBP-FA5

FIRST OFF DO NOT FLAME!!!!! this situation is outta my control

okay so im changing my rotors and brakes on my 94 civic dx its pretty straight foward up until i get to the 2 scews that hold the rotor in place,


they where a bitch to remove! i know they are the original rotors from 1994!!! after i stripped them i had to chisel them out

my question is, can i put everything back together without the screws for one day since the lugs push the wheel to the hub keeping the rotor in place?

No VDUBS here in206

sure, but you know you can put a bolt in there, should only be temporary but it works pretty good

iwanttokillgod

why chisel them its easier to drill the head off

NHBP-FA5

i dont have any bolts that fit the hole right, thats why i need one day to get new ones, everything is closed already since its night time here in cali

crzy619

yes u can put everything back and u will be ok with out the screws... been doin it for years

NHBP-FA5

i tried drilling them out but it broke the drill bit off 4 taps with a small chisel and they came right out

NHBP-FA5

cool i just needed reassurance!!! THANKS EVERYBODY

No VDUBS here in206

lol take the bolts off your fenders haha