MadScientistGuy

Alright, I'm sorta new to tuning crome so bear with me. I've scoured the pgmfi forums and a lot of it is greek to me. I am aware I need certain parts to tune properly, but I want to spend the money on the parts, not on someone else tuning my car telling me how messed up it was. I have the Hulog datalogger cable and I have a Moates Burn 2 chip burner, and a Crome pro license. I basically just want to know what I'm looking at when I have a bin open. I got the basics down, like tuning for larger injectors and just outside settings like vtec and 2 step and all the basic stuff. I am in the process of wiring up a wideband, it's not digital, but it was free so yea. I don't have an emulator for RTP but was thinking about getting one. I'm still messing with the TPS to get it dialed in, as that is a major factor in tuning. I have a FPR so I can adjust that wherever I need it.

To give you some background, the engine is a JDM b16a running JDM P30 ecu with a random tune someone gave me. It's worked fine for now, but I've installed a larger intake mani and tb and was thinking about throwing some 440 injectors in, so I want to dial this thing in so she's running at full potential. I've downloaded and edited a few roms to try and tinker with it and see if I can make any progress, some work better than others, but I know it's not completely right.

First of all, I want to know the exact process for tuning a TPS, I have a new IACV on the way, however there is a plugin on Crome to eliminate the IACV, so I want to know what to do once I do so, so I don't mess anything up, etc. My TPS isn't far out of calibration, just a little bit enough where the idle is funny. Ask me any questions I'll answer them to the best of my ability.

Thanks

First.EG

xenocron.com has a start up write up on there site.

BobbyRodriguez

Should post in tuning for best feedback.

grumblemarc

iTrader: (4)

Post here for best feedback.
http://forum.pgmfi.org/

MadScientistGuy

Posted in tuning, thnx.