Are all midshafts/midaxles the same?
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: USA
Posts: 1,441
Likes: 0
Received 0 Likes
on
0 Posts
Are all midshafts/midaxles the same?
Are all midshafts the same?
I have a JDM B16A, I needs a new midshaft or midaxle, are all Bseries midaxles the same?
I have a JDM B16A, I needs a new midshaft or midaxle, are all Bseries midaxles the same?
#2
Honda-Tech Member
No, the 89-91 crx/civic and the 90-93 ones have a female joint at the axle, and the 94+teg and 92+ civic SiR/VTi's have a male joint.
The bottom on is a ZC one, but it is an example of what I mean.
The bottom on is a ZC one, but it is an example of what I mean.
#3
Re: Are all midshafts/midaxles the same? (2camsaam)
I needed to know that too.
What happens if there is a leak at the bearing of the midshaft? How long can it go without being replaced? I have black grease around the little rubber thing and I think mine is going bad.
What happens if there is a leak at the bearing of the midshaft? How long can it go without being replaced? I have black grease around the little rubber thing and I think mine is going bad.
#5
Honda-Tech Member
Re: (JDMHatchBizzle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMHatchBizzle »</TD></TR><TR><TD CLASS="quote">and the splines on the driver side axle where it meets the intermediate shaft are longer on the 90-93.</TD></TR></TABLE>
If I'm not mistaken, all the drivers sides are full splined, and the passengerside is half splined, I might have that backwards.
If I'm not mistaken, all the drivers sides are full splined, and the passengerside is half splined, I might have that backwards.
#7
Re: (elwood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by elwood »</TD></TR><TR><TD CLASS="quote">I have like 10 of them sitting here if anyone needs one. </TD></TR></TABLE>
I need the male one for a B16A. How much.
I need the male one for a B16A. How much.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: USA
Posts: 1,441
Likes: 0
Received 0 Likes
on
0 Posts
Re: (KOALA YUMMIES)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KOALA YUMMIES »</TD></TR><TR><TD CLASS="quote">
I need the male one for a B16A. How much.</TD></TR></TABLE>
ME 2.
I need the male one for a B16A. How much.</TD></TR></TABLE>
ME 2.
Thread
Thread Starter
Forum
Replies
Last Post
B16CRXT
Acura Integra
3
06-23-2006 02:05 PM
caspers_hatch
Honda Civic / Del Sol (1992 - 2000)
19
08-17-2005 08:05 PM