The Official EF Discussion Thread
Honda-Tech Member
Joined: Apr 2007
Posts: 2,380
Likes: 0
From: NY
Re: The Official EF Discussion Thread
Time to get back to the crx though..
looking to buy another one if anyone sees anything on the east coast, let me know.
something different
Joined: Sep 2002
Posts: 6,995
Likes: 1
From: grand rapids/chicago, usa
Re: The Official EF Discussion Thread
just letting you guys know, you might not want to "rebuild" the boots on an axle that already is clunking/popping. new grease wont really help that in the long run.
you need to overbore the *****/cage setup, etc.
i can get CNC overbore axles, using OEM cores for about 55 bucks. best axles i've ever used. local shop does them , all the dealerships sell them as their "rebuilt" because of the quality of his process and the OEM cores.
you need to overbore the *****/cage setup, etc.
i can get CNC overbore axles, using OEM cores for about 55 bucks. best axles i've ever used. local shop does them , all the dealerships sell them as their "rebuilt" because of the quality of his process and the OEM cores.
Thread Starter
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: The Official EF Discussion Thread
When I sold the front end I shipped it without the hood (local guy bought the hood, thank God). FedEx is usually the cheapest. My advise is to package it well and buy insurance.
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: The Official EF Discussion Thread
blox velocity stack dyno thread
https://honda-tech.com/forums/all-motor-naturally-aspirated-44/blox-velocity-stack-filter-%7Edyno-comparison%7E-2646800/
https://honda-tech.com/forums/all-motor-naturally-aspirated-44/blox-velocity-stack-filter-%7Edyno-comparison%7E-2646800/
Honda-Tech Member
Joined: Sep 2006
Posts: 574
Likes: 1
From: theMIDWESTCOAST
Re: The Official EF Discussion Thread
hey Adam, I wanna get a set done in spring for next season. I have a shitty Autozone one on the driver side and it vibrates like a bitch under load.
Honda-Tech Member
Joined: Jul 2006
Posts: 2,113
Likes: 0
From: Roseville really smells like poo, pooo, pooo, CA
Re: The Official EF Discussion Thread
just letting you guys know, you might not want to "rebuild" the boots on an axle that already is clunking/popping. new grease wont really help that in the long run.
you need to overbore the *****/cage setup, etc.
i can get CNC overbore axles, using OEM cores for about 55 bucks. best axles i've ever used. local shop does them , all the dealerships sell them as their "rebuilt" because of the quality of his process and the OEM cores.
you need to overbore the *****/cage setup, etc.
i can get CNC overbore axles, using OEM cores for about 55 bucks. best axles i've ever used. local shop does them , all the dealerships sell them as their "rebuilt" because of the quality of his process and the OEM cores.
)
Re: The Official EF Discussion Thread
**** zdyne, for the money of a used one you can get a crome p28 go obd1 and still have enough for a nice surf and turf dinner with your girl.
The Boot
Joined: Dec 2001
Posts: 9,841
Likes: 0
From: Arizona, US
Re: The Official EF Discussion Thread
Finally got my irratic idle situation figured out.
#1 new IAVC...did nothing.
#2 checked vac lines for leaks...all good.
#3 Messed with the TPS...did nothing.
#4 using a stethoscope with the end off found a leak coming from the bottom side of the intake mani. One new intake mani gasket later and its running like a champ again.
what a FAWKING relief.
#1 new IAVC...did nothing.
#2 checked vac lines for leaks...all good.
#3 Messed with the TPS...did nothing.
#4 using a stethoscope with the end off found a leak coming from the bottom side of the intake mani. One new intake mani gasket later and its running like a champ again.
what a FAWKING relief.
Honda-Tech Member
Joined: Feb 2007
Posts: 4,032
Likes: 0
From: Indiana, United States
Re: The Official EF Discussion Thread
What gasket did you use?? I used a feltpro (autozone) one when I first did the swap.. That thing was junk! So I replaced it with a honda one. 
The Boot
Joined: Dec 2001
Posts: 9,841
Likes: 0
From: Arizona, US
Re: The Official EF Discussion Thread
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: The Official EF Discussion Thread
Both of them are hot as hell, but the one with light brown hair is killing me!
Do you guys know where I can get some clear Stanley corner lights for my 91 crx? Clear bumper lights also would be great!
Do you guys know where I can get some clear Stanley corner lights for my 91 crx? Clear bumper lights also would be great!
