<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourthgenhatchB17 &raquo;</TD></TR><TR><TD CLASS="quote">

Yes. What are u planning on BAR'ing?</TD></TR></TABLE>


b16A wired obd-1

but now that I think about it. I already did a "semi" wire tuck on my injectors wires. Might as well "tuck" my resistor box too


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Old_Honda &raquo;</TD></TR><TR><TD CLASS="quote">They'll probably be too distracted by his technicolor JDM accessories to notice .</TD></TR></TABLE>

hahaha
They'll be to busy catching glances at the Valve Cover and Fuel Rail

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridmiklo &raquo;</TD></TR><TR><TD CLASS="quote">

That was quite the gay </TD></TR></TABLE>


if you only knew how much I despise that commercial

I want to kick that guy in his freakin chest

 

You have an aftermarket fuel rail Vega? Cause if you do that will not pass b.a.r. If i'm correct you cant have a fuel gauge either. Tsk Tsk Tampering with the fuel lines on a street driven automobile in the state of california is a big no no.

That's how the pigs got me last time.

 

why don't you just get the right injectors and do it the right way.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kylefakesi-r &raquo;</TD></TR><TR><TD CLASS="quote">why don't you just get the right injectors and do it the right way.
</TD></TR></TABLE>

It will also look cleaner. My cheap *** still has the resistor box in my obd-1 rex. I got a question for you guys too. Does the p28 read the tailights? I hooked up my tailights wrong (long story, being semi color blind didn't help much either). But I get a ELD check engine light and was wondering if that could be the reason. I wasn't throwing any codes when I was obd-0 and the tailights were not working at the time either.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridmiklo &raquo;</TD></TR><TR><TD CLASS="quote">You have an aftermarket fuel rail Vega? Cause if you do that will not pass b.a.r. If i'm correct you cant have a fuel gauge either. Tsk Tsk Tampering with the fuel lines on a street driven automobile in the state of california is a big no no.

That's how the pigs got me last time. </TD></TR></TABLE>


nah, I just added a touch of paint to mine.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kylefakesi-r &raquo;</TD></TR><TR><TD CLASS="quote">why don't you just get the right injectors and do it the right way.
</TD></TR></TABLE>

well I'm still using my old harness from when I had the z6. And it took me so long just to figure everything out that I don't even want to go tampering with anything just yet. I want to make sure the car starts on the harness I have no before I go trying to "fix" anything.
Thats why I'm not even going to mess around and do a wire tuck right now.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box &raquo;</TD></TR><TR><TD CLASS="quote">


b16A wired obd-1

</TD></TR></TABLE>

Search my name under "topics created by user" and you should find my old crx fs thread. Maybe there is some info there (w/ pics i believe) that can steer u in the right direction.

 

Ahhh it's so hard finding 14" tires Anyone have any suggestions for a 14x7 wheel? I'm told to get 185/60/14's but they don't clear a 7" wide wheel. Next is 195/55/14 but I can't find any reasonably priced (for a daily )

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick &raquo;</TD></TR><TR><TD CLASS="quote">Ahhh it's so hard finding 14" tires Anyone have any suggestions for a 14x7 wheel? I'm told to get 185/60/14's but they don't clear a 7" wide wheel. Next is 195/55/14 but I can't find any reasonably priced (for a daily )</TD></TR></TABLE>


Buy some some azenis man. The make 14" rims look tough. 195/60HR-14

 

^^ Sick

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">

Get a rywire harness, (i made my own but ive installed two) It has all the wiring specs and is really a nice unit.

</TD></TR></TABLE>

I bought one from some guy on h-t 6 weeks ago, and it never showed up. I'm waiting on paypal to finish the claim. Once I get refunded I'll surf over to rywire and just order one

Does he include any info. for the use of an obd1 dizzy? I have the plugs, just don't know how the wiring is supposed to be

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy &raquo;</TD></TR><TR><TD CLASS="quote">

I bought one from some guy on h-t 6 weeks ago, and it never showed up. I'm waiting on paypal to finish the claim. Once I get refunded I'll surf over to rywire and just order one

Does he include any info. for the use of an obd1 dizzy? I have the plugs, just don't know how the wiring is supposed to be</TD></TR></TABLE>

Everything, ryan does a nice job on the instructions

 

That's what I heard. I kinda need it to finish up anyway. Guess I'll have to find somethign else to work on until I can get it. I was planning on having it a month ago so I could finish all the wiring then. I want to get all the wiring done, and put the harness in to make sure everything is working. Then pull the motor and rebuild it and not have to worry about finding any wiring problems later when i go to start a new motor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick &raquo;</TD></TR><TR><TD CLASS="quote">Ahhh it's so hard finding 14" tires Anyone have any suggestions for a 14x7 wheel? I'm told to get 185/60/14's but they don't clear a 7" wide wheel. Next is 195/55/14 but I can't find any reasonably priced (for a daily )</TD></TR></TABLE>


Azenis 195 60 r14, i got 4 shipped for 296 bucks from edgeracing.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">


Azenis 195 60 r14, i got 4 shipped for 296 bucks from edgeracing.</TD></TR></TABLE>

Agreed, but I still have a set of the old azenis. Good bang for the buck.

 

Falken Ziex is another good alternative for daily driven tires. They have a much better tread wear rating (400 something for 14" I think), than Azenis.

 

Hmmm... the 195/60/14's don't look as balloon-y as I thought they would.

 

<FONT SIZE="4">WTB: Clean 88-91 Crx HF or DX. Motorless, blown motor, running, w/e.</FONT>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8kid &raquo;</TD></TR><TR><TD CLASS="quote"><FONT SIZE="4">WTB: Clean 88-91 Crx HF or DX. Motorless, blown motor, running, w/e.</FONT></TD></TR></TABLE>

another one ??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF JUNKIE &raquo;</TD></TR><TR><TD CLASS="quote">

another one ?? </TD></TR></TABLE>

Read the thread. Haha I feel like im you. With your changing cars and ideas all the time.

 

i have kuhmo 712 tourings in 185/60/14 They have lasted forever and have great traction in foul weather. aka beater wheels/tires

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chronicsinners &raquo;</TD></TR><TR><TD CLASS="quote">i have kuhmo 712 tourings in 185/60/14 They have lasted forever and have great traction in foul weather. aka beater wheels/tires </TD></TR></TABLE>

They won't clear a 7" wide wheel though

I guess I'm gonna have to get the Azenis then =D

 

you could def. stretch them.... VW guys run 185/65/13 on 13x8" wheels

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy &raquo;</TD></TR><TR><TD CLASS="quote">I bought one from some guy on h-t 6 weeks ago, and it never showed up. I'm waiting on paypal to finish the claim. Once I get refunded I'll surf over to rywire and just order one

Does he include any info. for the use of an obd1 dizzy? I have the plugs, just don't know how the wiring is supposed to be</TD></TR></TABLE>

saturday after we move your sister out of your mom and dad's i'll do the dizzy for you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chronicsinners &raquo;</TD></TR><TR><TD CLASS="quote">you could def. stretch them.... VW guys run 185/65/13 on 13x8" wheels</TD></TR></TABLE>

Any pics of what the 185/60/14 would look like? I would love some 195/55/14's to get the higher revs though.