The Official EF Discussion Thread
Honda-Tech Member
Joined: Mar 2002
Posts: 12,899
Likes: 1
From: www.exospeed.com, Valencia, CA
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
I'm going to run a long resonator, strait back with piping, then mount the muffler where the fuel tank used to be. No bends and invisible from the back.
</TD></TR></TABLE>
oh you're running a fuel cell instead?
I'm going to run a long resonator, strait back with piping, then mount the muffler where the fuel tank used to be. No bends and invisible from the back.
</TD></TR></TABLE>oh you're running a fuel cell instead?
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (exospeedAMcrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx »</TD></TR><TR><TD CLASS="quote">
oh you're running a fuel cell instead?</TD></TR></TABLE>
Yeah, actually the fab guy is picking up the car in the morning. He's going to drop the cell in the spare tire hole, below flush, and make me an aluminum rear firewall for it. It'll be subtle and may prevent pig harassment.
oh you're running a fuel cell instead?</TD></TR></TABLE>
Yeah, actually the fab guy is picking up the car in the morning. He's going to drop the cell in the spare tire hole, below flush, and make me an aluminum rear firewall for it. It'll be subtle and may prevent pig harassment.
Honda-Tech Member
Joined: Mar 2002
Posts: 12,899
Likes: 1
From: www.exospeed.com, Valencia, CA
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
Yeah, actually the fab guy is picking up the car in the morning. He's going to drop the cell in the spare tire hole, below flush, and make me an aluminum rear firewall for it. It'll be subtle and may prevent pig harassment.</TD></TR></TABLE>
oh niiice.
Yeah, actually the fab guy is picking up the car in the morning. He's going to drop the cell in the spare tire hole, below flush, and make me an aluminum rear firewall for it. It'll be subtle and may prevent pig harassment.</TD></TR></TABLE>
oh niiice.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (exospeedAMcrx)
Keep in mind, I live in OK, so we don't have inspections/emissions. I'm not even sure if it's street legal, but I should be fine with a plate over it.
Mickey also has a nice sand blaster, so that should save me hours upon hours of manual labor.
Here's a quesion for your guys. Where can I find baking soda in bulk? Sam's? I want to use something less abrasive than sand. Any other ideas? Would anyone local cary some sort of media specifically for blasting with?
Modified by -NA-aLL-thE-wAy- at 7:07 PM 3/24/2007
Mickey also has a nice sand blaster, so that should save me hours upon hours of manual labor.
Here's a quesion for your guys. Where can I find baking soda in bulk? Sam's? I want to use something less abrasive than sand. Any other ideas? Would anyone local cary some sort of media specifically for blasting with?
Modified by -NA-aLL-thE-wAy- at 7:07 PM 3/24/2007
Honda-Tech Member
Joined: Mar 2002
Posts: 12,899
Likes: 1
From: www.exospeed.com, Valencia, CA
Re: (-NA-aLL-thE-wAy-)
Ya I never did that when I had my CRXs on the street, Cali is pretty tough with that and with the long driving to get to places here in Socal, it would be too frequent fillups. hehe. I contemplated on that though, I eventually cut up the car to make it a race car, but it was the biggest mistake I ever did. Once you take off those parts, cant go back. 
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (exospeedAMcrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx »</TD></TR><TR><TD CLASS="quote">Ya I never did that when I had my CRXs on the street, Cali is pretty tough with that and with the long driving to get to places here in Socal, it would be too frequent fillups. hehe. I contemplated on that though, I eventually cut up the car to make it a race car, but it was the biggest mistake I ever did. Once you take off those parts, cant go back. </TD></TR></TABLE>
I'm running a 5 gal for space reason's. If I baby it, it should get 35mpg. I don't mind frequent fill ups, it'll give her a chance to cool down, hehe.
</TD></TR></TABLE>I'm running a 5 gal for space reason's. If I baby it, it should get 35mpg. I don't mind frequent fill ups, it'll give her a chance to cool down, hehe.
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">I'm going to run a long resonator, strait back with piping, then mount the muffler where the fuel tank used to be. No bends and invisible from the back. </TD></TR></TABLE>
i know someone whos running this exhaust, sounds so dope. dumps right before the lca
http://www.redshiftmotorsports...t=102
think i might get it when i have extra money, and after i smog my car
doing another engine swap on my car tonight and tomorrow, finally died on me on pepper ave. on the ten. hopefully this will last till i can replace the timing belt next weekend, wish me luck
</TD></TR></TABLE>i know someone whos running this exhaust, sounds so dope. dumps right before the lca
http://www.redshiftmotorsports...t=102
think i might get it when i have extra money, and after i smog my car
doing another engine swap on my car tonight and tomorrow, finally died on me on pepper ave. on the ten. hopefully this will last till i can replace the timing belt next weekend, wish me luck
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (pandarex)
hmmm, thats actually a good looking exhaust. i would still route the exhaust from the muffler around the axle and then straight out the right side with a exhaust tip or even route it along the stock way across the spare tire area and then out the stock location with a exhaust tip to help smooth out the sound more.
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (gospeedgo1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">it's going to look gay. Angled exhausts are so 2003.</TD></TR></TABLE>
i could care less for trends, like james (vegabox), i just do what i want with my car, there is no general goal i am heading towards (jdm, racelook, germanlook, hardparker, etc) or trying to imitate.
i could care less for trends, like james (vegabox), i just do what i want with my car, there is no general goal i am heading towards (jdm, racelook, germanlook, hardparker, etc) or trying to imitate.
Re: (gospeedgo1)
i think i would too, maybe even have them just send along a extra piece and keep the muffler there. inside gets a little loud cause of where the end is, but his car is also a autocross car.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (pandarex)
LOL, I ran across this video on break.com. This is on I-240 in OKC. I was stuck in the traffic after this happened.
Insane driving skills, or lots of luck...
http://my.break.com/media/view...99241
Insane driving skills, or lots of luck...
http://my.break.com/media/view...99241
Honda-Tech Member
Joined: Jul 2004
Posts: 682
Likes: 0
From: ARIZONA
Re: (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax »</TD></TR><TR><TD CLASS="quote">pretty much done.
</TD></TR></TABLE>
DAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMN this pic oWns!
awesome setup ese, looks effin goooooood!
</TD></TR></TABLE>
DAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMN this pic oWns!
awesome setup ese, looks effin goooooood!
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (gospeedgo1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 »</TD></TR><TR><TD CLASS="quote">
i could care less for trends, like james (vegabox), i just do what i want with my car, there is no general goal i am heading towards (jdm, racelook, germanlook, hardparker, etc) or trying to imitate. </TD></TR></TABLE>
This guy
About time people started stepping on the "I don't give a **** you train"
i could care less for trends, like james (vegabox), i just do what i want with my car, there is no general goal i am heading towards (jdm, racelook, germanlook, hardparker, etc) or trying to imitate.
</TD></TR></TABLE>This guy
About time people started stepping on the "I don't give a **** you train"
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: (pandarex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pandarex »</TD></TR><TR><TD CLASS="quote">
i know someone whos running this exhaust, sounds so dope. dumps right before the lca
http://www.redshiftmotorsports...t=102
think i might get it when i have extra money, and after i smog my car
doing another engine swap on my car tonight and tomorrow, finally died on me on pepper ave. on the ten. hopefully this will last till i can replace the timing belt next weekend, wish me luck</TD></TR></TABLE>wow. I didnt know someone was actually producing these. I had plans to make my own similar to that but have it dumo at the first bend in the tunnel. Plan to use 3 - 12" resonators to keep it low tone/quiet.
i know someone whos running this exhaust, sounds so dope. dumps right before the lca
http://www.redshiftmotorsports...t=102
think i might get it when i have extra money, and after i smog my car
doing another engine swap on my car tonight and tomorrow, finally died on me on pepper ave. on the ten. hopefully this will last till i can replace the timing belt next weekend, wish me luck</TD></TR></TABLE>wow. I didnt know someone was actually producing these. I had plans to make my own similar to that but have it dumo at the first bend in the tunnel. Plan to use 3 - 12" resonators to keep it low tone/quiet.
Honda-Tech Member
Joined: Feb 2003
Posts: 5,297
Likes: 0
From: I love the east coast, OH
Re: (vega_box)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">
This guy
About time people started stepping on the "I don't give a **** you train" </TD></TR></TABLE>
More Like the *** train, When i said they were 2003, i ment thats when people were doing them, they still wernt cool.
This guy
About time people started stepping on the "I don't give a **** you train"
</TD></TR></TABLE>More Like the *** train, When i said they were 2003, i ment thats when people were doing them, they still wernt cool.
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (b16_madman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16_madman »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
that **** is ****** scary man what the hell
I did a 3am photoshoot. I could post picture in here but then someone would call me a *****
https://honda-tech.com/zerothread?id=1932431
Oh yeah CF-48 Center caps for sale
PM me
</TD></TR></TABLE>
that **** is ****** scary man what the hell
I did a 3am photoshoot. I could post picture in here but then someone would call me a *****
https://honda-tech.com/zerothread?id=1932431
Oh yeah CF-48 Center caps for sale
PM me
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (JAMinCiViC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JAMinCiViC »</TD></TR><TR><TD CLASS="quote">man.. i saw 2 sets of those mugens for $200 each. </TD></TR></TABLE>
dude what the hell are you doing on H-T then you should be buying those bitches
$200 for 15"??
dude what the hell are you doing on H-T then you should be buying those bitches
$200 for 15"??
Re: (vega_box)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">
dude what the hell are you doing on H-T then you should be buying those bitches
$200 for 15"??
</TD></TR></TABLE>
for that price they are probally the 13s.
dude what the hell are you doing on H-T then you should be buying those bitches
$200 for 15"??
</TD></TR></TABLE>
for that price they are probally the 13s.
