<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">crx blades &gt;&gt; si wheels all day any day</TD></TR></TABLE>
eh. personal preference i guess? i like both. i like the newer 15" si wheels better because i have better tire options for the type of driving i want to do. 195/50-15 ftw.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">g2 that would look killer. All sleepered out with the K. The CRX Sawblade Si wheels would look killer, and hella sleeper too, but the brake shortcoming suck too bad. </TD></TR></TABLE>
well i have DA front and rear brakes... the crx si wheels should clear them...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">The only thing I hate about them is they weigh twice as much as they should. If you are going true sleeper, I say HX wheels, and OEM hubcaps. </TD></TR></TABLE>
did that already. this is when i first finished my swap:



but like i said, i didn't like the tire selection for 14" wheels.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2_teg_ &raquo;</TD></TR><TR><TD CLASS="quote">


but like i said, i didn't like the tire selection for 14" wheels.</TD></TR></TABLE>




195/60/14 Azenis on some Teddy Bears

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">




195/60/14 Azenis on some Teddy Bears </TD></TR></TABLE>


Da Bearz





g2 you should just put some azenis on your 14's with hubbies. Your screwed unless you put R comps or slicks on it anyway. Your fighting a loosing battle getting traction on street tires with a K.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">

They dont clear 10.3" brakes and i dont think allow enough air flow for a serious car. Though my crx looks bad *** on some


</TD></TR></TABLE>

This car is beautiful.. and im very happy to know its a NY car!! my crx looks very similar.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">

They dont clear 10.3" brakes and i dont think allow enough air flow for a serious car. Though my crx looks bad *** on some


</TD></TR></TABLE>

Hell yeah Chemist! I wish those blades could clear larger brakes. I'd definately have a set on my crx.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HOTSAUCE01 &raquo;</TD></TR><TR><TD CLASS="quote">

This car is beautiful.. and im very happy to know its a NY car!! my crx looks very similar. </TD></TR></TABLE>

Thanks man, its a texas car that was in georgia for two years before i brought it to the snowy hell known as buffalo. ZERO rust and only seen one snow storm. (freak early october storm)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">




195/60/14 Azenis on some Teddy Bears </TD></TR></TABLE>
those tires are too fat. i dont like that. those are integra tires.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">g2 you should just put some azenis on your 14's with hubbies. Your screwed unless you put R comps or slicks on it anyway. Your fighting a loosing battle getting traction on street tires with a K. </TD></TR></TABLE>
my 195/50-15 yokohamas get near perfect traction for the type of driving i do. it only breaks loose in 1st gear.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2_teg_ &raquo;</TD></TR><TR><TD CLASS="quote"> those are integra tires.</TD></TR></TABLE>


OMG.....HAHAHAHAHAHHAAAAA, thats some funny stuff!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">crx blades &gt;&gt; si wheels all day any day</TD></TR></TABLE>

i thought i was the only one who doesnt like 99-00 si wheels. id rather roll on my stockies


and an extra set with teg center caps laying around just incase

 

Crx stockies/blades never did it for me. Eww.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIred91 &raquo;</TD></TR><TR><TD CLASS="quote">


OMG.....HAHAHAHAHAHHAAAAA, thats some funny stuff!</TD></TR></TABLE>
excuse me?

 

Hey...what does it mean when you rev it up and your take and speedo goes up but the car goes nowhere?!?! At first I thought it was the clutch but now I am leaning more towards it being the tranny.

 

could be axles, too.

 

I didnt know Top Setup had a k series crx , which is pretty damn sick btw

http://www.youtube.com/watch?v=P5mqvcYNqRg

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2_teg_ &raquo;</TD></TR><TR><TD CLASS="quote">
excuse me?</TD></TR></TABLE>

I never knew those tires were for tegs only.......ROFL

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIred91 &raquo;</TD></TR><TR><TD CLASS="quote">

I never knew those tires were for tegs only.......ROFL</TD></TR></TABLE>
yea. rofl. thats hilarious.

anyway. the sidewall on 195/60-14 is taller then 185/60-15. integras come with taller tires then crx's. i prefer a slimmer sidewall.

 

195/60/14 also came on the SiR and 1.6i-16vt, so...it's not that big of a deal, you could try and find yourself some 205/50/14...

 

205/50 are only in drags that i could find.

unless theres a 205/50 race tire

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crx(gator) &raquo;</TD></TR><TR><TD CLASS="quote"> try and find yourself some 205/50/14...</TD></TR></TABLE>


who makes those and anyone have pictures of what they look like
sounds like and aggressive combo with the right wheels

 

two question for the deadest thread ever??


does anyone know of a company that makes a Carbon Kevlar EF9 hood or should I just do a Kevlar overlay sheet over my present hood??

Second question
The Modified Magazine from last year. Beleive it was the Sept. Issue with Nisei coverage and a picture of my VC
does anyone have that issue and want to sell it to me please.

 

TOP SETUP ef8 anyone? also, i test drove 2 EP3s yesterday and today. disappointing. now its either s2000 or get another CRX (giving my current one to my cousin if his grades are good this year) and do some suspension work, body rigidity improvement.
http://hybrids.jp/forum/showthread.php?t=25779

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">

does anyone know of a company that makes a Carbon Kevlar EF9 hood or should I just do a Kevlar overlay sheet over my present hood??
</TD></TR></TABLE>

I believe Fiber Images makes a Kevlar hood.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 &raquo;</TD></TR><TR><TD CLASS="quote">TOP SETUP ef8 anyone? also, i test drove 2 EP3s yesterday and today. disappointing. now its either s2000 or get another CRX (giving my current one to my cousin if his grades are good this year) and do some suspension work, body rigidity improvement.
http://hybrids.jp/forum/showthread.php?t=25779
</TD></TR></TABLE>

Awesome. CRX is the best, so get another one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 &raquo;</TD></TR><TR><TD CLASS="quote">TOP SETUP ef8 anyone? also, i test drove 2 EP3s yesterday and today. disappointing. now its either s2000 or get another CRX (giving my current one to my cousin if his grades are good this year) and do some suspension work, body rigidity improvement.
http://hybrids.jp/forum/showthread.php?t=25779
</TD></TR></TABLE>

Yep, that's Charlie's new toy...pretty f*ckin' sweet if you ask me.

Yay for new emoticons and for my clutch pedal dying on the way to work today. Got down my street and the pedal dropped...thank god I can just walk home and grab my truck. Cable broke? Shift fork broke? I know what I'll be looking at tonight...

 

that sucks nick

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy &raquo;</TD></TR><TR><TD CLASS="quote">that sucks nick </TD></TR></TABLE>

You'll see the car down by the school when you get home.

Oh...and...uhhhh...want to help me push it?