damn thats badass ^^

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">
i'm about ready to sell the rex/swap and buy a vette. true speak. </TD></TR></TABLE>

can i get updates on that

 

ohohhh yeaahh

didn't someone do that before and try to sell then on eBay.
He had some projectors and replaced the outside lens with JDM ones.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 &raquo;</TD></TR><TR><TD CLASS="quote">I'm very curious to see what the beam looks like without touching with the fluting. i have seen the plug and plays, but very interested in an actual retrofit. good luck </TD></TR></TABLE>

Yeah, I've seen pictures of del-sol fluted lenses + a BMW retrofit and the fluting tends to kill the cut-off resulting in crazy glare. If you'd like though, I could take snaps of the cutoff with the fluting before I sand some of it down. Planning to do the retrofit first before I start working on the lenses.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy &raquo;</TD></TR><TR><TD CLASS="quote">you dont need to go through all that trouble.. just get some ebay headlights and use the plastic lense on oem housing. </TD></TR></TABLE>

Do you know for sure if the EF9 lenses fit onto the USDM buckets? If they do, that would be a great option as TSX projectors aren't bi-xenons and I'd like to retain my highbeams . Probably around the same amount of work though. Measuring/dremeling/sanding the fluting down.

If it does fit though, someone sell me their e-bay projectors for hella cheap .

 

not too sure on housing size from usdm to jdm.. i would think they are the same. i can compare and get back to you tomorrow

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy &raquo;</TD></TR><TR><TD CLASS="quote">not too sure on housing size from usdm to jdm.. i would think they are the same. i can compare and get back to you tomorrow </TD></TR></TABLE>

For sure man, thanks a lot . I just don't want to buy someone's busted up projectors and find out they sit 2" lower with the SiR front haha (or too far back with the EF9 lenses) .

Btw James, Lol at your sig. Try http://www.1guymudpie.com .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi &raquo;</TD></TR><TR><TD CLASS="quote">

Do you know for sure if the EF9 lenses fit onto the USDM buckets? If they do, that would be a great option as TSX projectors aren't bi-xenons and I'd like to retain my highbeams . Probably around the same amount of work though. Measuring/dremeling/sanding the fluting down.

If it does fit though, someone sell me their e-bay projectors for hella cheap . </TD></TR></TABLE>


some1 did it b4

it was posted in here a while back ago with the eBay link to them selling them

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dkrex001 &raquo;</TD></TR><TR><TD CLASS="quote">i was told by vega_ROCKS to come in here ask what would be better for a LS/Vtec a b16a or a gsr head for a allmotor dd</TD></TR></TABLE>

why not just do a vtec block? GSR or ITR FTW. make it easier on yourself. that question has been asked and answered a thousand times a day here on H-T. ots almost 2008 for crying out loud.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 &raquo;</TD></TR><TR><TD CLASS="quote">can i get updates on that </TD></TR></TABLE>


we need updates on your situation first. you ever gonna pick up this VC?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">we need updates on your situation first. you ever gonna pick up this VC? </TD></TR></TABLE>

oh yea i forgot that you had it. damn i need to get my **** together lol

 

Some hot EF's here!! Here's my little project, all the way from New Zealand..1989 JDM RHD EF9. Frankenstein b18/16 motor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">Nice. EF's are the best.

Anyone else remember this thread going like 5-6 pages a night with random posts from CBE, Clayton, Chase, Joe, Bart, Kyle, Chemist, ect. Jeez i miss those times.</TD></TR></TABLE>

I miss those days.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy &raquo;</TD></TR><TR><TD CLASS="quote">not too sure on housing size from usdm to jdm.. i would think they are the same. i can compare and get back to you tomorrow </TD></TR></TABLE>

you would know better than i (owning both EF9 & ED6), but i beleive they are not the same lenses, the shapes are different.

I too have been doing some research on retrofitting, since i am usdm front i was gonna go with the ebay projectors But i dont see any reason why you couldnt sand down the fluting on the lenses to allow for a sharp cutoff

 

yeah the lenses are different. but he was wondering if the jdm bucket housing was the same as the usdm. so he could switch the plastic jdm lens on to a usdm bucket. so he can retain the high beam. i just compared and the bucket housings are noticeably different.. but im not sure if the seating area for the lense is the same size as the usdm bucket.. someone must have some solid evidence out there

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MaverickEF9 &raquo;</TD></TR><TR><TD CLASS="quote">Some hot EF's here!! Here's my little project, all the way from New Zealand..1989 JDM RHD EF9. Frankenstein b18/16 motor.</TD></TR></TABLE>

Sick

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">
i'm about ready to sell the rex/swap and buy a vette. true ]
</TD></TR></TABLE>

I get my license back in 36 days sell the rex, and I will be driving to cali in the beater to kill you. That is all. I got driving priveledges to work the other day. It feels good to be in an EF again. It is like low 20s outside so I had to get off the bike, and do something. I just got a call from my old boss, he wants to hire me back at the old audio shop. That means dealer accounts on go fast parts. I can't wait to be able to drive to my shop, and work on the crx again.

 

I just wanted to let you guys know that Rob. got new carpet and floormats for his civic, pretty sick. Go check it out.

https://honda-tech.com/zerothread?id=2165651

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteSlipsWithStickers &raquo;</TD></TR><TR><TD CLASS="quote">I just wanted to let you guys know that Rob. got new carpet and floormats for his civic, pretty sick. Go check it out.

https://honda-tech.com/zerothread?id=2165651</TD></TR></TABLE>

I'm glad I can see your sarcasm via the interweb... Rob.=

 

i think that all the EF'ers are so tired of his shinanigans that we give him the silent treatment

 

LMAO! That thread is nothing but bashing.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1320whtrex &raquo;</TD></TR><TR><TD CLASS="quote">







Interior not completed yet.... However Cluster is fully functional.

My Jamaica License plate

</TD></TR></TABLE>

 

OMFG!

is that a dd?

woah....

 

Anyone with an auto CRX kinda enough to show me where the cable goes..I cant figure it out lol I think i maybe missing a bracket?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteSlipsWithStickers &raquo;</TD></TR><TR><TD CLASS="quote">I just wanted to let you guys know that Rob. got new carpet and floormats for his civic, pretty sick. Go check it out.

</TD></TR></TABLE>

Even through all the douchbaggery, his stuff is pretty freakin' clean. Gotta give him that.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chronicsinners &raquo;</TD></TR><TR><TD CLASS="quote">i think that all the EF'ers are so tired of his shinanigans that we give him the silent treatment </TD></TR></TABLE>

Not streetwerkz! He calls it as he see's it lol

I got new carpet in my basement. Should I make a thread?

 

Check out these 16year old girls flashing their *****!

 

That turbo ef is sick, i really liek the student parking sticker

AFI manifold?

 

one peice front end w/k20-t