Offical eH squad list.
B*a*n*n*e*d
Joined: Jun 2006
Posts: 390
Likes: 0
From: you know my steez, ca, united states
Re: (Jay_Sensing)
this is cransos.......heres some new pics......of the past 2 weeks.
this hatch...........was lowered real weird
my homies girl need to get a new cf lip
this hatch...........was lowered real weird
my homies girl need to get a new cf lip
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 10,475
Likes: 0
From: Working in the NRBG, Garage
Re: (American.Graffiti)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by American.Graffiti »</TD></TR><TR><TD CLASS="quote">3 wheel motion. 
</TD></TR></TABLE>woot woot!<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS*Mark »</TD></TR><TR><TD CLASS="quote">sick pics </TD></TR></TABLE>thanks mark
</TD></TR></TABLE>woot woot!<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS*Mark »</TD></TR><TR><TD CLASS="quote">sick pics </TD></TR></TABLE>thanks mark
lulz
Joined: May 2005
Posts: 3,671
Likes: 0
From: In Tha Sticks, WI, USA
Re: (ATS*Mark)
update on my motor build: while trying to take off the crank pully i ended up snapping my timing belt so now i dunno how the hell to get it off i had my air impact turned up to 140psi and the bitch didnt budge at all any help on getting it off? its basically the crank sitting in the block with the pully on it
Member
Joined: Sep 2004
Posts: 1,821
Likes: 0
From: city where we go hard on a bitch, wa
Re: (Just Joey)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Just Joey »</TD></TR><TR><TD CLASS="quote">http://www.flickr.com/photos/justjoey06/419230551/</TD></TR></TABLE>
clean
clean
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 10,475
Likes: 0
From: Working in the NRBG, Garage
Re: (Just Joey)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Just Joey »</TD></TR><TR><TD CLASS="quote">http://www.flickr.com/photos/justjoey06/419230551/</TD></TR></TABLE>
i like both of the rears in that picture!
i like both of the rears in that picture!
Honda-Tech Member
Joined: Nov 2001
Posts: 6,580
Likes: 1
From: ESSJ ALLDAY
Re: (cranberry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranberry »</TD></TR><TR><TD CLASS="quote">put the fly wheel on and get something to hold it on the teeth and go to town on it.....i feel you pain.</TD></TR></TABLE>
x2
or you can order the crank pulley holder from like toolwarehouse.com or harbor frieght or something. If you were local, i would let you borrow mines. I would still buy one though, its $40bux ish, and you wont have to worry about messing up the teeth on your flywheel.
x2
or you can order the crank pulley holder from like toolwarehouse.com or harbor frieght or something. If you were local, i would let you borrow mines. I would still buy one though, its $40bux ish, and you wont have to worry about messing up the teeth on your flywheel.
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 10,475
Likes: 0
From: Working in the NRBG, Garage
Re: (SjCiViCHB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SjCiViCHB »</TD></TR><TR><TD CLASS="quote">
x2
or you can order the crank pulley holder from like toolwarehouse.com or harbor frieght or something. If you were local, i would let you borrow mines. I would still buy one though, its $40bux ish, and you wont have to worry about messing up the teeth on your flywheel.</TD></TR></TABLE>
that tooo......whats popin beaver......
x2
or you can order the crank pulley holder from like toolwarehouse.com or harbor frieght or something. If you were local, i would let you borrow mines. I would still buy one though, its $40bux ish, and you wont have to worry about messing up the teeth on your flywheel.</TD></TR></TABLE>
that tooo......whats popin beaver......
Joined: May 2004
Posts: 12,779
Likes: 0
From: bAnAnA spokin in ELA, KILLACALI
Re: (cranberry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranberry »</TD></TR><TR><TD CLASS="quote">i like both of the rears in that picture! </TD></TR></TABLE>
h
rny jeff
</TD></TR></TABLE>h
rny jeff
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 10,475
Likes: 0
From: Working in the NRBG, Garage
Re: (cuz_ican)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cuz_ican »</TD></TR><TR><TD CLASS="quote">
h rny jeff </TD></TR></TABLE>you know me......coughcough35yroldcoughcough....... 
h
rny jeff </TD></TR></TABLE>you know me......coughcough35yroldcoughcough.......
Honda-Tech Member
Joined: Aug 2005
Posts: 2,695
Likes: 3
From: I miss the east coast, TX, USA
Re: (92BluEH-3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92BluEH-3 »</TD></TR><TR><TD CLASS="quote">update on my motor build: while trying to take off the crank pully i ended up snapping my timing belt so now i dunno how the hell to get it off i had my air impact turned up to 140psi and the bitch didnt budge at all any help on getting it off? its basically the crank sitting in the block with the pully on it</TD></TR></TABLE>
If you throw the flywheel on, put a 12 point 17mm on one of the bolts, and let it rip on the other end with a breaker bar, it will come off. My last one was seized hard as hell. Had to use a propane torch and the 17mm on the other end but we got it off without damaging anything.
kinda sexy for a terd huh?
If you throw the flywheel on, put a 12 point 17mm on one of the bolts, and let it rip on the other end with a breaker bar, it will come off. My last one was seized hard as hell. Had to use a propane torch and the 17mm on the other end but we got it off without damaging anything.
kinda sexy for a terd huh?
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 10,475
Likes: 0
From: Working in the NRBG, Garage
Re: (Jay_Sensing)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jay_Sensing »</TD></TR><TR><TD CLASS="quote">
If you throw the flywheel on, put a 12 point 17mm on one of the bolts, and let it rip on the other end with a breaker bar, it will come off. My last one was seized hard as hell. Had to use a propane torch and the 17mm on the other end but we got it off without damaging anything.
kinda sexy for a terd huh?
</TD></TR></TABLE>when do you tune?
If you throw the flywheel on, put a 12 point 17mm on one of the bolts, and let it rip on the other end with a breaker bar, it will come off. My last one was seized hard as hell. Had to use a propane torch and the 17mm on the other end but we got it off without damaging anything.
kinda sexy for a terd huh?
</TD></TR></TABLE>when do you tune?
Junior Member
Joined: Feb 2006
Posts: 305
Likes: 0
From: Grabbing 4th at 9000, Somewhere, here
Re: (cranberry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jay_Sensing »</TD></TR><TR><TD CLASS="quote">
If you throw the flywheel on, put a 12 point 17mm on one of the bolts, and let it rip on the other end with a breaker bar, it will come off. My last one was seized hard as hell. Had to use a propane torch and the 17mm on the other end but we got it off without damaging anything. </TD></TR></TABLE>
tighten first, then loosen,sounds dumb but works 90% of the time.
If you throw the flywheel on, put a 12 point 17mm on one of the bolts, and let it rip on the other end with a breaker bar, it will come off. My last one was seized hard as hell. Had to use a propane torch and the 17mm on the other end but we got it off without damaging anything. </TD></TR></TABLE>
tighten first, then loosen,sounds dumb but works 90% of the time.
Honda-Tech Member
iTrader: (7)
Joined: Apr 2005
Posts: 7,680
Likes: 0
From: Between my mind and reality.
Re: (MotorMouth)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranberry »</TD></TR><TR><TD CLASS="quote">
i like both of the rears in that picture! </TD></TR></TABLE>
ummm... no disrespect if thats someone on here's sister or something.
i like both of the rears in that picture! </TD></TR></TABLE>
ummm... no disrespect if thats someone on here's sister or something.
Honda-Tech Member
Joined: Jun 2005
Posts: 2,588
Likes: 0
From: IE 951
Re: (cranberry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranberry »</TD></TR><TR><TD CLASS="quote">you know me......coughcough35yroldcoughcough....... </TD></TR></TABLE>
hahahahhahahahhahahahahahahahahahahahahah
here have another
</TD></TR></TABLE>hahahahhahahahhahahahahahahahahahahahahah
here have another
Honda-Tech Member
Joined: Jan 2005
Posts: 2,260
Likes: 0
From: Dirty Souf, StarkVegas
Re: (FreshEG6!*)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FreshEG6!* »</TD></TR><TR><TD CLASS="quote">
hahahahhahahahhahahahahahahahahahahahahah
here have another</TD></TR></TABLE>
lolz
hahahahhahahahhahahahahahahahahahahahahah
here have another
</TD></TR></TABLE>lolz
lulz
Joined: May 2005
Posts: 3,671
Likes: 0
From: In Tha Sticks, WI, USA
Re: (shyboi4u)
thx for the help guys i think ill buy the crank pully holder seeing as how the motors on and engine stand and i wont be able to get the flywheel on unless i take the motor off.
Honda-Tech Member
Joined: Jul 2006
Posts: 2,541
Likes: 0
From: Ohio, Us
Re: (American.Graffiti)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by American.Graffiti »</TD></TR><TR><TD CLASS="quote">
ummm... no disrespect if thats someone on here's sister or something.</TD></TR></TABLE>
Haha
ummm... no disrespect if thats someone on here's sister or something.</TD></TR></TABLE>
Haha
