** The offical 96-00 civic 4dr thread ** PART 2
Re: ** The offical 96-00 civic 4dr thread ** PART 2
My best advice is to be patient, and pay attention. This is a action and reaction style paint job. What you do will affect the results. If I suggest something, subconsciously you may go over and abroad, or even below what I did. Then you'll turn around and say I suck. LOL! you can use any wrinkle paint, and follow manufacturer specs on the can, but start slow and you'll understand exactly what I am saying.
Re: ** The offical 96-00 civic 4dr thread ** PART 2
I'm guessing it sprays similar to a truck bed coating then. It's not cold here so I may try to do this on something that is laying around to get the right technique on doing it down. Thanks for the heads up tho.lol
Re: ** The offical 96-00 civic 4dr thread ** PART 2
EK - the most popular one, and the one I've used before too is VHT. I looked around local but couldn't find it so I just bought it from Summit Racing.
The application is just like any other spray paint, but the drying and heat make it wrinkle. When I used it on my old valve cover I put it in the oven to quicken it up, though I wouldn't really recommend doing this because our apartment smelled like spray paint for a few days I've heard people using a heat gun as well to dry it and make it wrinkle.
The application is just like any other spray paint, but the drying and heat make it wrinkle. When I used it on my old valve cover I put it in the oven to quicken it up, though I wouldn't really recommend doing this because our apartment smelled like spray paint for a few days I've heard people using a heat gun as well to dry it and make it wrinkle.
Re: ** The offical 96-00 civic 4dr thread ** PART 2
OK..I'll chime in here. Best bet is let mother nature do her thing. here's my quick DIY: the rest is up to you.
Paint choice: Dupli-color wrinkle ($8.00)
Avail: Any hardware store - I went to slaughter-zone (autozone)
Part painted: ( strut bar)
Step 1: I sanded it down w/ 800grit ( removed mild rust, next I washed w/ mild detergent - hand soap will do )
Step 2: I found this works best, but I chose to build my coats for durability ( time will see if it was true ) Cover surface entirely, Apply directionally in med heavy sweeping motions. left to right, up and down. 5 min between coats.
(note: watch how it cures, if the results are satisfactory, repeat )
Step 3: If you have non-wrinkle or glossy area, repeat w/ a heavy coat. This can be done 15min later
All my work was done, in the sun, sun warm part - or object,outside temp @ about 75F, I let it all dry in the sun. 2hrs later I had my wrinkle. Repeat until your wrinkle is achieved.
Paint choice: Dupli-color wrinkle ($8.00)
Avail: Any hardware store - I went to slaughter-zone (autozone)
Part painted: ( strut bar)
Step 1: I sanded it down w/ 800grit ( removed mild rust, next I washed w/ mild detergent - hand soap will do )
Step 2: I found this works best, but I chose to build my coats for durability ( time will see if it was true ) Cover surface entirely, Apply directionally in med heavy sweeping motions. left to right, up and down. 5 min between coats.
(note: watch how it cures, if the results are satisfactory, repeat )
Step 3: If you have non-wrinkle or glossy area, repeat w/ a heavy coat. This can be done 15min later
All my work was done, in the sun, sun warm part - or object,outside temp @ about 75F, I let it all dry in the sun. 2hrs later I had my wrinkle. Repeat until your wrinkle is achieved.
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Re: ** The offical 96-00 civic 4dr thread ** PART 2
EWW LOL! Thanks bra, more to come, nvr ending. Pray that my rear discs come through, So I'll be needing those ABS sensors shortly.
I think I will upgrade as follows:
GSR ABS F - I think my current (F) bearings are going bad
GSR R Discs - update coating and bushing on the arm ( hopefully w/ sensors from battle )
GSR ABS Booster
GSR ABS 1" MC - I'd like my brakes to stop when cued
and I have new pads and rotors already
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Hey whats up everyone. hope everyone is well. sorry to here you feeling blue port hope ya feel better buddy
well i paint new lip this moring at my job and this is how it turn out hope you guys like. i still have my oem Si lip and will be swapping them everyonce in awhile lol
well i paint new lip this moring at my job and this is how it turn out hope you guys like. i still have my oem Si lip and will be swapping them everyonce in awhile lol
Re: ** The offical 96-00 civic 4dr thread ** PART 2
^
im doing pretty much everything you did cept i did extended studs, i got my front & rears both abs (too bad my car aint abs )
im going to replace the prop valve, the master cylinder
i just need to install it =X
im doing pretty much everything you did cept i did extended studs, i got my front & rears both abs (too bad my car aint abs )
im going to replace the prop valve, the master cylinder
i just need to install it =X
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Looks good sonic, I'm still debating between the mugen and SI lip... I don't want my plastic cheep *** rep ctr one... speaking of rock chips Ash, I pulled to close to the curb yesterday at school and scuffed mine up lol. Oh well, not too worried about it at this point.
Well I broke down just now and ordered the banner lol, and i'll pickup something from spoon at the end of the month when I get my other check. Something small for now, but when I start working I found the part I'm gonna save up for
Well I broke down just now and ordered the banner lol, and i'll pickup something from spoon at the end of the month when I get my other check. Something small for now, but when I start working I found the part I'm gonna save up for
Re: ** The offical 96-00 civic 4dr thread ** PART 2
Sonic
Looks good man, clean. What size are those speedy wheels? 17?
lol
Sweet, but you'll be twisting a line and changing some fitings using abs on a non abs car! Either way I think we will enjoy the update, or I will.
ASHY LARRY!
GM! - LOL
Looks good man, clean. What size are those speedy wheels? 17?
lol
Sweet, but you'll be twisting a line and changing some fitings using abs on a non abs car! Either way I think we will enjoy the update, or I will.
ASHY LARRY!
GM! - LOL
Re: ** The offical 96-00 civic 4dr thread ** PART 2
moose, either way both lips will last a long time. my mugen one lasted 3 years before it cracked, my stupid fault tho. i daily my car and leave it in the school parking lot to so don't worry it holds up. less there are thieves afoot.
good find on the seats Ash
good find on the seats Ash
Re: ** The offical 96-00 civic 4dr thread ** PART 2
I think I will upgrade as follows:
GSR ABS F - I think my current (F) bearings are going bad
GSR R Discs - update coating and bushing on the arm ( hopefully w/ sensors from battle )
GSR ABS Booster
GSR ABS 1" MC - I'd like my brakes to stop when cued
and I have new pads and rotors already
GSR ABS F - I think my current (F) bearings are going bad
GSR R Discs - update coating and bushing on the arm ( hopefully w/ sensors from battle )
GSR ABS Booster
GSR ABS 1" MC - I'd like my brakes to stop when cued
and I have new pads and rotors already