Trouble building more boost... any ideas?
05-18-2009, 06:29 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2008
Location: centennial, co, usa
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Trouble building more boost... any ideas?
Just finished my new setup-
f22a
GE sleeves
Bisimoto/Arias ceramic coated pistons
crower rods
head is stock other than bisimoto valve springs
h23 runners h22 plenum
1000cc
walbro feeding bosch 044
Turbo is precision t67 with .85 exhaust hausing
2.5" piping
3" DP
tial 44mm gate.
prologger boost controller
cant get boost over 18 psi. Tried removing the bottom port and putting pressure strait to top port of wastegate and still nothing over 18psi. Boost controller is working and pressure tested system with no leaks. anyone have any ideas/tips?
f22a
GE sleeves
Bisimoto/Arias ceramic coated pistons
crower rods
head is stock other than bisimoto valve springs
h23 runners h22 plenum
1000cc
walbro feeding bosch 044
Turbo is precision t67 with .85 exhaust hausing
2.5" piping
3" DP
tial 44mm gate.
prologger boost controller
cant get boost over 18 psi. Tried removing the bottom port and putting pressure strait to top port of wastegate and still nothing over 18psi. Boost controller is working and pressure tested system with no leaks. anyone have any ideas/tips?
05-18-2009, 06:58 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2008
Location: centennial, co, usa
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Re: Trouble building more boost... any ideas?
it was originally a .9 bar spring but was only able to get that to 16.5 psi and today swapped that spring out for 1.2bar worth of spring and got it up to 18 but no more.
edit- its a 3bar map
edit- its a 3bar map
Thread
Thread Starter
Forum
Replies
Last Post
vg7z
Forced Induction
6
09-20-2006 08:27 PM
SilverLudeSi
Forced Induction
8
11-24-2002 09:42 PM