i am pickin up my turbo,manifold,3"downpipe IC ic piping and return and sending lines this weekend......i need to but a fuel regulator and a wastegate what do you recomend. (at this moment i am running a tock b18c1 block with a b16a head for compression of 9.7 or 9.8-1)
what do u recomend and how much boost is to much for this stock setup?

 

suckkaa.... so thats the big secret... youll see... haha... your compression is much higher than 9.7, 9.8, you are in the 10's... as far as boost, if you dont want to hear boom... dont do more than 6 or 7 psi

 

tial wastegate and aermotive fpr

 

can u pass the blunt or what ever yer smoking on over here? since when does a b16 head on a b18c1 block produde ahigher compression ratio than stock?

yes a stock gsr engine in 10-1 but mine is not the stock like setup

 

Hey Y2kGsR,
Remember me? I have the "other" '00 DVP GS-R. Congrats on coming over to the darkside.

A TiAL wastegate would be a good choice, IMO.

 

I kinda remember that the b16 head on a b18c1 block will give you higher compression numbers. Wasn't it due to the fact that the b16 head is lower(kinda like milling a head)? I don't know, someone correct me if this is wrong...

But I suggest a tial wastegate...

 

Do you want a boost depandent FPR then vortech if the other my AEM works jsut fine.

Tial wastegate

B16a head a on GSR block lower compression.
Type r piston in a GSR motor raise compression.

It is all about head design.

k

 

I have an HKS external wastegate if you're interested. $225 shipped to your door.

E-mail me at d16y8@hotmail.com

 

road race engineering has tial 35mm wastegates for about $225 shipped. the aem fpr works fine. overboost has them cheap.

 

I would go with the Tial Wastegate and the new SARD Fuel Pressure Regulator.

 

ok well TiAL is almost a defenet i am thinkin that i might go with the vortech unit.

 

i knew u were up to something!

 

Got mine for $205 shipped I'll try to remember the name of the shop. The guy's name is Wayne. He was really cool and got me the good deal

 

Hey Myplex is that Fast Track Motorsports,

 

aeromotive fpr or paxton
and
tail 35mm would do the trick
3.88 bar??? or something like that abut 6-7 psi

 

Yes Liltrix(Mr. Jones) it is Fast Track Motorsports.
http://www.fasttrackmotor.com
sales@fasttrackmotor.com