Ok real quick, this just slipped my mind. Im putting together my ls vtec set up. My turbo will be tapped from the head to the turbo, then im most likly going to be using a golden eagle vtec conversion, then where do i tap the other side on the line too.. i feel retarted, and i couldnt find anything searching. thanks

 

bump

 

come on guys

 

come on.. im trying to buy stuff, need this question answered

 

come on.. where do i tap the ls vtec oil line, if my head is already tapped for turbo??

 

i'll try to help you out, but i really didn't get your question.

i never saw anyone use an oil feed line from the head to the turbo. if your gonna get the ge vtec conversion kit than just use that. one hole for the head and the other to the turbo.

 

Ok.. well for a turbo, you tap the head, for the oil supply line. On an ls vtec (with the sandwich adapter) the line needs to be run from the sandwich, to the head. Now...... oh wow i think i just answered my own question just by thinking about it. There must be 2 places to tap because for the turbo, its a supply, and the vtec, is a supply. So they must be different. ok thanks.

 

you can go to http://www.tunertoys.com to find a tap for the back of your head that will allow you to tap oil for the vtec line, and for your turbo feed.