My new set-up dyno 587whp and 433tq
07-08-2006, 04:47 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: Boise, ID
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
My new set-up dyno 587whp and 433tq
Only got a few street tune on the car and went to the dyno today. 20lbs got around 500whp and finished off with 30lbs got 587 whp and 433 torque. Air temp was 110+... My freaking wideband gave out at the end and couldn't fine tune it. This turbo is huge, time to get a 3.5 bar map sensor and boost it up... This won't happen 'til next season. All on stock fuel lines and fuel pressure regulator. Was hoping for the 600whp club, but it's good enough. Should be seeing some 10's this weekend.
Upgrade:
Neukin T4 ramhorn
Garrett T4/67
Precision 1000cc
Tial 44mm wastgate
3in charge pipe (cold side)
Upgrade:
Neukin T4 ramhorn
Garrett T4/67
Precision 1000cc
Tial 44mm wastgate
3in charge pipe (cold side)
07-08-2006, 05:24 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: Boise, ID
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boostedK20a2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedK20a2 »</TD></TR><TR><TD CLASS="quote">nice numbers man. what fuel were you on?</TD></TR></TABLE>
Had some 92 already in and mix with 5 gallons of 110.
Had some 92 already in and mix with 5 gallons of 110.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post