My ls project
#251
Honda-Tech Member
Re: My ls project
sup its good hearing from you agian thanks alot sorry to hear about you losing your job that sucks i changed the gear oil in the tranny i had some discount oil in it i don't know why i put it but i went to the honda dealer and bought mtf so lets see what happen 2marrow night will get some more video
Ehh **** happens with jobs..With the way the economy is I assumed it was going to happen so I "should" have already been looking for something but I didn't so no one to blame for that but myself. Good Luck with the Honda MTF..I used to run it a few years back when I worked for Honda(I got it free)..Right now I have Castrol GTX 10W-30 in my tranny and here lately its been kinda notchy feeling so I think its time I change it and try something else. I'll keep a lookout for the new vid
#253
Honda-Tech Member
Join Date: Feb 2009
Location: Salem, Oregon
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
Just going to tune on fourteen so I can play with it, not going to leave it there. Just why pay a tuner to tune again if i want more boost. I want to keep around three hundred til i get used to that power. But ls/v makes a lot of power, I hate vtec but those heads flow like mother f&%$#ers
#254
Honda-Tech Member
Thread Starter
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
Just going to tune on fourteen so I can play with it, not going to leave it there. Just why pay a tuner to tune again if i want more boost. I want to keep around three hundred til i get used to that power. But ls/v makes a lot of power, I hate vtec but those heads flow like mother f&%$#ers
#255
Honda-Tech Member
Thread Starter
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
track is closed until the friday after thanks giving there is another track i was gonna go to but i got called from work they switched my work hours now im working 7 10s fine by me sat is time and a half and sun is double but now i have no days off for a little bit and can't go to the track
#257
Honda-Tech Member
Thread Starter
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
i gotta go to moroso to find out only been to the 1/8th track im working on buying slicks when i get the slicks i will take a trip up there its 2 hours away
Last edited by ls_on_boost; 11-15-2009 at 04:26 PM.
#259
Honda-Tech Member
Thread Starter
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
lol kk what did your car dyno at 13 psi are you on slicks whats your times i might be buying a gsr tranny with lsd i found the problem with my tranny the shift linkage was curved when i had installed it it gave me a ruff time to line up with the two bolts that hold it i fixed it today gotta test it and see what happens
#260
Honda-Tech Member
Join Date: May 2005
Location: CENTRAL, FL
Posts: 3,870
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
lol kk what did your car dyno at 13 psi are you on slicks whats your times i might be buying a gsr tranny with lsd i found the problem with my tranny the shift linkage was curved when i had installed it it gave me a ruff time to line up with the two bolts that hold it i fixed it today gotta test it and see what happens
#261
Honda-Tech Member
Re: My ls project
You can bump up your rev limiter. I had a straight LS go 11.9 at 119 in a RS integra on 24.5 slicks with a b16 trans. It was running past the traps at 8200
#262
Honda-Tech Member
Join Date: May 2005
Location: CENTRAL, FL
Posts: 3,870
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
i ran a 12.7@113 on a 85 deg night with a 2.15 60'
btw whats your setup in the teggy ... stock longblock? what turbo? how much boost?
#263
Honda-Tech Member
Thread Starter
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
kenny im not sure what to buy i what a few different things cams,slicks and lsd u told me to buy a gsr tranny and now i found one with lsd but he's taxin i figure i can buy that one and sell my 16 rather then put a lsd in it it will cost around the same because then i have to pay someone to install it are crowers the best cams for ls and with the gsr tranny with the 7500 rev i got will i still go into 5th with 24.5 slicks
#264
Honda-Tech Member
Join Date: Feb 2007
Location: wawa, united states
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
yeah i have the same set up just a different turbo mani and a bigger turbo looks good man i cant wait just a few more weeks and i will have mine done
#268
Honda-Tech Member
Thread Starter
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
finally bought some mt slicks 24.5x8x15 car started to over heat at the track so i only got 2 runs in there was a lot of air in the system hopefully it was just that will see whats up next week
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Last edited by ls_on_boost; 11-30-2009 at 02:37 AM.
#271
Honda-Tech Member
Join Date: Oct 2005
Location: I.E So cAL, ca, usa
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
nice man, u got stock sleeves right? im thinking of building an extra ls i got laying around for the heck of it, i love LST my hatch has been boosted for over a year now stock lst on 10 psi.
#272
Honda-Tech Member
Join Date: Feb 2009
Location: Salem, Oregon
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
that is a big a/r for a small compressor side. Does that give more or less lag. I got a garret 60 trim with a .63 a/r. Wonder if she will have less lag
#274
Honda-Tech Member
Thread Starter
iTrader: (5)
Join Date: Mar 2009
Location: sunshine state
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Re: My ls project
yeah my turner told me to get it so i have room to work with i believe it kicks in at 5k and hits hard im gonna do a ripper video soon just haven't had the time
#275
Honda-Tech Member