hybrid901

could you give me a run down on your setup?

MotorMatrix.com

b16a2
je 9:1
crower rods
ge sleeves
ferrea head light p&p
hondata 4bd
980 cc injectors
62-1 turbo with stage 5 wheel
rev hard ac manifold
msd digital 7
aeromotive 1000 pump

email me of you are looking for anything else in particular.

CzanSOHC

Thats nice...i'm jealous

JDM92CX

Amazing setup man!

EKB18BPR3

how are u gonna put 600hp to the floor? not flaming or anything, just asking

Chronicsinners

CRazy numbers! must be an amazing setup, any pics of it or the car?

MotorMatrix.com

I am going to attempt to put down 600whp. I'm not sure what will happen but i'm going to try.

acr382

Im interested in the duty cycle and your fuel psi when u made 522whp can u find that info and post it? Also whats the fastest quarter mile time with mph?

SpdFrk

Damn thats nice setup man. Got any videos or pics of your car.

Is that a t3 turbine housing u are using.

Also whats the setup on the h22 race car.

Thanks


[Modified by SpdFrk, 11:35 PM 1/11/2003]


[Modified by SpdFrk, 11:35 PM 1/11/2003]

twkdCD595

I am also curious about the housing on that turbo, t3 62-1?

What about the one for sale in your sig... same thing?

The sweed

you are using race gas right...... how much hp are you doing on pump gas?

DIRep972

iTrader: (1)

he has a 18lb spring, he doesnt run pump gas.

MotorMatrix.com

I'm not sure of the duty when i made 522 as i did not have the laptop hooked up i just made the pulls. i think fuel pressure was about 60-70psi. my fastest 1/4 mile time was 12.4@126 on 19lbs of boost with street tires. my 60ft was 2.5. it was just a run for fun. i had no cage , so i was just going for mph.

MotorMatrix.com

the one for sale in my signature is the one on my car. I am going with a bigger turbo to try to get over 600whp on less than 28psi. the hondata limits you to 28 psi so I am trying to make the most possible under 28psi.

here are some of my videos. right click and download otherwise they may come up in your browser real small.

http://www.motormatrix.com/19lbs555r.mpg

http://www.motormatrix.com/civicvs500hp240.mpg

By the way, last night we made 565whp on 35shot of NOS. The nitrous was added just to take out some of the lag in 5th and it works great.



[Modified by MotorMatrix.com, 4:49 PM 1/12/2003]

Slick GS-R

iTrader: (2)

wow.......nice numbers man

BringIt10s

nice numbers - but going fast on street tires is extremely hard. just remember that

we did 126 on 17-18psi and pumpgas

MotorMatrix.com

I'm sure going fast on street tires is hard but what people dont realize is that the street tires I run are 245/50/16. these tires hook better than some 13 inch slicks. they are 25.1 inches tall,nearly 10 inches wide and have about 4 inch profile. I dont know too many people that fit these on their civics.I guess we will have to wait and see how they perform in a couple of weeks when i get to the track.

SEFIxCivic

does that tire fit under the stock wheel well? also what rim accomidates such a large tire? sounds interesting.

MotorMatrix.com

The tire fits on a 7 inch rim no problem. i didnt have to cut the wheel well at all. i did have to cut the front bumper so the tire doesnt rub when turning. its barely noticebale though.

Captain Save-a-Hoe

Nice to see you went to Cartek. Im setting up a dyno day there soon. Stefans a nice guy


[Modified by Blackie Chan, 2:54 AM 1/13/2003]

MotorMatrix.com

I cant say enough good stuff about stefan and Cartech. He is a straight up guy and really friendly. He has opened up the shop after hours several times for us to use the dyno. I mean like after 9pm. stefan is the man

The sweed

ok letīs change the question a bit.

Have you drove it with pump gas??
How much boost did you do if so and do you know any hp numbers befor you had to switch to race gas??

MotorMatrix.com

on pump gas at 14psi it made around 340-350hp. the turbo i have doesnt really start to make power until 15psi (race gas) where it picked up 20hp per lb of boost. at 20psi it made 440hp.

The sweed

Thanks!! thats what I wnated to know...