Ls/Vtec turbo dyno results.....
04-24-2004, 10:36 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Canada
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Ls/Vtec turbo dyno results....
Just thought I would post up my recent dyno of my built Ls/vtec setup. This was tuned at only 15psi on 94 pump gas and done very conservatively by my tuner. I am going back to him im May to get the boost turned up on C16, should see 400whp no problem.
setup:
Garrett T3/T04E 50 trim/.63 a/r
Drag Gen 3 maniold
2.5" d/p
PWR i/c
720cc injectors
Tial 35mm wastegate
Tial 50mm b.o.v.
Thermal 3" exhaust
Benson Machine/Darton 84mm sleeved block
CP 9.0:1 pistons
Eagle rods
Z10 eng. crank girdle
Modified by GEN2TEG at 7:48 AM 4/25/2004
Modified by GEN2TEG at 7:50 AM 4/25/2004
Modified by GEN2TEG at 7:51 AM 4/25/2004
setup:
Garrett T3/T04E 50 trim/.63 a/r
Drag Gen 3 maniold
2.5" d/p
PWR i/c
720cc injectors
Tial 35mm wastegate
Tial 50mm b.o.v.
Thermal 3" exhaust
Benson Machine/Darton 84mm sleeved block
CP 9.0:1 pistons
Eagle rods
Z10 eng. crank girdle
Modified by GEN2TEG at 7:48 AM 4/25/2004
Modified by GEN2TEG at 7:50 AM 4/25/2004
Modified by GEN2TEG at 7:51 AM 4/25/2004
04-24-2004, 10:42 PM
#3
Join Date: Apr 2004
Location: Ottawa, Ontario, Canada
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ls/Vtec turbo dyno results..... (m R g S r)
my bad ladies..im blind so it hought the 2 was 3
:S haha i had the pleasure to take a drive in this car
:S
sick ride Tarcy!
:S haha i had the pleasure to take a drive in this car
:S
sick ride Tarcy!
04-24-2004, 11:05 PM
#5
Honda-Tech Member
Join Date: Jul 2002
Location: Where N/A is Not Applicable
Posts: 4,361
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ls/Vtec turbo dyno results..... (TurboTegB18c)
Dyno graph looks fake haha nice numbers but it has so much more potential props to a fellow g2 owner. 
Trending Topics
04-25-2004, 04:53 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Canada
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ls/Vtec turbo dyno results.... (jdmteg96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmteg96 »</TD></TR><TR><TD CLASS="quote">Thats the kind of results that i am hoping to get out of my car real soon. What type of head do you have?
</TD></TR></TABLE>
b16a head, with a mild port & polish, 3 angle valve job and skunk2 valvetrain.
</TD></TR></TABLE>
b16a head, with a mild port & polish, 3 angle valve job and skunk2 valvetrain.
04-25-2004, 05:26 PM
#10
Honda-Tech Member
Re: (ELSpool)
damn, too bad you didnt put that thing on a dynojet with a full race kit... you would have made 500 whp at 15 psi. 
just kidding good numbers man.
just kidding good numbers man. 
Thread
Thread Starter
Forum
Replies
Last Post
