installing fmu
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: nashville, tn, us
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
installing fmu
i need help installing my fmu on my 91 crx si, i know a vacum line goes in it , and fuel goes in 1 thing and fuel comes out the other , but vortech dont have it marked, and what do i do where the old fuel went in and out
#4
Re: installing fmu (Flamenco-T)
so basically you take what ever is sticking into the bottom of the FPR and stick that into the bottom of the FMU. And just find some piping and connect it to the side of the FMU and plug the other end into the bottom of the FPR???? That's it?
#5
Junior Member
Thread Starter
Join Date: Aug 2002
Location: nashville, tn, us
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
Re: installing fmu (Flamenco-T)
sorry guys i still dont understand, i know where the fpr is, but on one side if the fmu there is a small nipple i think that is where a vacumm line , but on the other side there is 2 other big nipples one coming from the center, what goes in there, then there is another one on the bottom what do i plug it 2
#7
Member
Join Date: Oct 2002
Location: Secret Tweaker Pad
Posts: 3,279
Likes: 0
Received 0 Likes
on
0 Posts
if you are looking at it from the side, the port on the very top get t'd into a vacuum line. the side port hooks int o the fmu. port on the very bottom is the return line to gas tank
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post