help..turbo install threw engine code

Reply Subscribe

Thread Tools

Search this Thread

Jul 6, 2001 | 06:35 AM

newsense

Thread Starter

New User

Joined: Apr 2001

Posts: 471

Likes: 0

From: Va Beach, VA

help..turbo install threw engine code

i installed a revhard turbo on my 94 acura integra ls....i also rebuilt the motor(all new stock parts)....
i am getting code 43......which is "FUEL SUPPLY SYSTEM". The book says to check vacuum lines and fuel lines...so i did that and it didnt go away
could this be my stock fuel pump...i am currently running the msd inline fuel pump and vortech fmu......

Jul 6, 2001 | 07:23 AM

00 Si

New User

Joined: May 2001

Posts: 438

Likes: 0

From: Deltona, Fl, USA

Re: help..turbo install threw engine code (newsense)

What kind of boost are you running and did you buy upgraded injectors? A Vortec FMU without injectors is like pourting a gallon of water through a straw.

Jul 6, 2001 | 08:51 AM

newsense

Thread Starter

New User

Joined: Apr 2001

Posts: 471

Likes: 0

From: Va Beach, VA

Re: help..turbo install threw engine code (00 turbosi)

i havent even boosted on it yet......im still trying to break in the motor...ive heard that this code means you are running extremely rich...my a/f gauge stopped working so i dont really know.....the car doesnt seem to be acting funny, but then again i havent taken it over 4k rpm.....any suggestions??

Jul 6, 2001 | 11:37 AM

dustin

Honda-Tech Member

Joined: Jan 2000

Posts: 14,500

Likes: 0

From: Sacramento, CA

Re: help..turbo install threw engine code (00 turbosi)

I run the Vortech FMU with stock injectors. It works just fine. The entire idea behind the Vortech 12:1 FMU is that it is to be used with stock injectors. If you had a way to control larger injectors, you would not need the FMU in the first place.

Dustin