Building a Turbo Si for the Street??
#1
Junior Member
Thread Starter
Join Date: Jun 2004
Location: ND
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Building a Turbo Si for the Street??
I wanna build up the B16 in my 2000 Si a little but when/if I race it at all it's usually on the Streets. I want some pretty decent numbers at least 350+whp on Pump Gas and 450+ on Race Gas. I'm probably gonna go with an B18A1 Block and a B16 Head, Internals and either a T3/T04, GT35R or SC61 Turbo.
I'm just basically looking for any comments, suggestions or help to get me going in the right direction on this project. Recommended parts and so on would be helpful...
Thanks
I'm just basically looking for any comments, suggestions or help to get me going in the right direction on this project. Recommended parts and so on would be helpful...
Thanks
#2
Honda-Tech Member
Join Date: Nov 2003
Location: South Florida
Posts: 3,711
Likes: 0
Received 0 Likes
on
0 Posts
Re: Building a Turbo Si for the Street?? (Si_Guy2000)
unless u have some long roads where u live u wont lay down 350hp and definatly not 450+ and if u try and get caught. thats your ***. Im in the 300's on wastegate boost and I still cant find room for a 4th gear pull even on the highyway without pulling up too fast into traffic. Im almost considering downgrading to a smaller turbo.
#3
Honda-Tech Member
Join Date: Jun 2006
Location: indy, in, USA
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
ya i have a guy here in indy that was 450 hp and had no traction for the street so i would say go for 250-300 and that still no traction in first and second
Thread
Thread Starter
Forum
Replies
Last Post
hotdoggies
Honda Civic / Del Sol (1992 - 2000)
5
12-27-2010 08:32 AM