got a quick question...

right now i have a godspeed bov and sitting at idle, the needle on the boost gauge reads -20, i switched it over to the turbo xs bov and it reads -10

is there a reason for this? when i use the godspeed bov, my boost hits 7 psi but when i use the xs turbo bov boost hits 5 psi?

confused

 

Cheap BOVs? Right now I'm using a Greddy knock-off BOV and a cheap Sunpro gauge and boost hits right where it's supposed to.

 

Sounds like a leak.

 

I would have to agree with there being a leak

 

I third the leak opinion.

 

Thanks guys! I rechecked everything and did notice air escaping from the base of the bov

 

xs turbo or turbo xs? both are **** and leak like a hooker with her legs spread

 

Huh, should still be pulling -20 even with a leak at idle, that is if you're boost reference is off the intake manifold.

 

it might not be. who knows... so many retarded people thinking they know how to build a car nowadays

 

"But the guy on the internet did it!"

 

thanks for the input guys...i took the top off the bov and found out that it wasnt sealing all the way, used a rubber o-ring and sealed it off, now it works like a charm