Hey fellas im caught up in a bit of jam to get my car going to get on the dyno...And was hoping some of you guys can help me out ..

I currently running a built turbo ls/vtec in my eg .. Problem im having is the Hondata s300 with 1000cc injectors will not start the car.. I used a basemap off hondata with the sc61 setup and nada... Now i also tried starting the car on the hondata and stock injectors and also nothing ... I hooked up an obd1 accord ecu i had laying around and she starts... I know the ecu didnt take a **** on me cause i uploaded a program on my cousin all motor car and she started right away.. So im completey lost.. any body have any type of inputs that would help please let me know ..

 

?

 

Your problem could be plenty of things.
I.E. map sensor wiring/signal/calibration or just the wrong basemap etc.

Your best bet would be to tow the car to your local Hondata tuner & have them check it out.