Avid b series eg mounts. The rear is solid but the oter 2 mounts have 94a bushings. No motor movement with less vibration. 225obo

Ferrea b series vtec dual springs and retainers. Only used on dyno
200 shipped ( paid 600)

Jg pro series valve springs and retainers. Brand new never used
100 shipped

 

Injector Dynamic 725cc injectors for s2000/k

Cleaned and flowed by Inline Pro.

Located in South Jersey.

$300

 

FS: ERL Built Shortblockhttp://hondamarketplace.com/showthread.php?t=3089113

 

Skunk 2 tuner2 track use only .. 400
Id1000 x8.. 650
Bosch 044 fuel pumps x2.. 350

Any ?'s call/text 203 449 1399

 

Kinsler K-140 FPR - Baddest FPR around. And so cute.

Dual -8 inlets, -6 outlet. Have a few fittings I can add on, as well as 6 feet of -6 hose.

$375 Shipped

Kinsler Monster Mesh post filter. -12 in/out.

$125 shipped

Magnafuel - Y - -12 in, dual -10 outs. I have -10 to -8 adapters.

$28 shipped, for reducers in blue or black add 10 bucks.

 

Seibon RSX Carbon Fiber Door Panels

Brand new never installed. They have been in storage for the past few months. One corner has some spidering from how it was stored but it would be hidden by the dash once installed. Pictures will show you how minor the cracks are. Looking for the best offer on them as i do not need them any longer. PM me with offers!

 

for sale:

b-series hydraulic tranny compitition super single clutch used for passes plus dyno $550

hytech custom headers for b-series $800 (sold)

if interestedcall or text 925-325-5005

thanks

 

All prices include paypal fee's and shipping to the lower 48. More pictures on request.

Racepak IQ3 Cable for AEM Series 1 or 2 P/N: 230-VM-EFIAEM **NEW** ***SOLD***

MSD Universal Race Coils P/N: 8232 **NEW** $200.00 OBO
(Great for custom coil per cylinder set-ups)

Tial 50mm Blow off valve black **NEW** ***SOLD***

 

Brand new in box weld 13x10 4x100 wheels. Never mounted only removed from box for picture. 600 plus shipping FIRM!!!

 

Some H22 Stuff




Mint as in FLAWLESS clean H22A4 block main caps and 55mm Crank, all original motor

OEM H22 Honda main cap bolts 1 TQ on them

OEM H22 head parts

H22 Rear main seal housing

H22>H23 manual tensioner setup with tensioner spring and bolts (everything)

Greddy timing belt (8K miles on it)

ARP Headstuds with 1 TQ on them



3 MINT Eagle Rods with ARP 2000 7/16 bolts and PERFECT 89mm CP pistons on them (Rings still on pistons and bearings are on rods too no spun bearings at all... . These are MINT skirts are flawless as are crowns). Around 6K miles on them

1 Set of TQ on bolts



Built H22 head with minor portwork, Ferrea 5000 valves, Supertech springs and Ti retainers complete with JDM cams, matching cam caps, cams gears, all rocker gear, sensors, etc... Has 2 bent ex valves in #1. I made 760 WHP on this head and setup on a T04ZR. Ill put valves in it if you want it fixed but it will go up a bit. I got ahold of a nasty nasty ported head, so Im not going to put valves in this one and run it again. All valvetrain has around 6K on it., its fresh, newish and GOOD TO GO, just change out valves in number 1 and Id surface it :O) No smoke, no issues other than the ex valves. No bullshit.

500 bucks


Competition clutch H/F series twin disk clutch complete with throwout bearing, FW bolts and freshened up disks (2500ish miles ago, splines are perfect). Holding 575 TQ no issues. 750 bucks



FLAWLESS...Garret T04ZR baller bearing turbo 67mm MAde 760 WHP and 575 TQ on it. Ceramic coated .81 AR hotside.
MINT 950 bucks

 

Tilton K-Series Carbon on Carbon Clutch Kit On Sale! This newly Tilton refurbished clutch kit just arrived! It has been upgraded to a GG straight from the factory! 850 f/lb of TORQUE. It includes Hydraulic Release Bearings and the Tilton Flow Control Valve! $4000
CALL 786-293-8876

 

Lithium Power Pack for sale! $1,150.00 (OBO)

Lithium Pros L925-16A 16V Lithium-Ion Powerpack Battery and Charger
16V Lithium-Ion Powerpack Battery and Charger
•16v Battery Charger
•Includes the L1600A battery
•PHCA: 505
•Watt Hours: 175
•Reserve: 26 minutes

CALL 786-293-8876

 

lookig to sell my AFI FF mani single gated t4 flange only bolted up never ran on a car
850+ shipping

 

Up for sale is my blueridge Top mount. It has a t4 turbo flange with 44mm Wastgate. The manifold is thermo coated. It also come with v band dump tube that is also coated. It has a 3inch vband down pipe.Im askin 800 Plus shipping & pp Fees. The manifold cost me 1150 plus 300 to get it coated. that 1450. This is a bargain.

Before coating.



After

 

Would prefer to sell complete for obvious reasons, but I will part out the main items...no small items will come off the chassis unless someone wants to buy the rolling shell, and then I will get rid of the small items if a sale happens on the roller.


105mm x 90mm Drag Cartel Motor
- Bensen Sleeved Block
- ACL Coated Race Bearings
- Saenz Rods
- Custom Cartel JE Pistons
- BC Crank
- Cartel Ported Head Package
- Single Lobe Stage 5 Cartel Cams
- Ferrea Roller Rocker Setup
- Supertech Valves and Valvetrain
- meticulously assembled by Jose Bello, machine work by Olsen's Engines
$10k new, Sell for $7500

Kinsler 62mm ITBs with Ford or K-Series TPS option (includes Fuel Rail)
$2100 new, $1800 sell

DTR/SSR Custom Megaphone Header for K24 in EF Civic
- $1100 new, $800 sell

Frana/Headway Performance 5 Speed All Motor Dog Box
- includes factory Case and all parts of trans (sliders, shift selector, etc), bolt in ready, will be completely assembled
- includes Mfactory Helical LSD
$6500 new, Sell for $4800

Comp Clutch "B" Plate Twin Disc (8037, K-Series)
$1150 new, Sell for $700

$25,000 - Car Complete Includes all of the above and the following (will not part out any of the below parts, sold only complete)
- 1989 Civic DX Hatch back, 80,000 original chassis miles before tuned into a race car, recently painted Cadillac Pearl White
- Exospeed Closed Fiberglass 3 Piece Front End
- 5 Point Cage installed by Synapse Motorsports
- Racepak Logger Dash for Haltech Engine Management Systems
- Innovate MTX-L Wideband
- Haltech 4 Channel EGT Amplifier and Sensor Setup
- Full Race-Spec Vehicle Wiring Program, Engine Harness, Cabin Harness, Battery/Charge Harness, Lights, Relay/Fuse Box, Switch Panel, etc
- Haltech Platinum Sport 2000 ECU including tunes and log files for Ignite Red Ethanol or VP Q16 Fuels
- Sensors for Fuel Pressure, Oil Pressure and Ground Speed (Rear Wheel Speed) along with all necessary EFI Sensors
- Fuel System, Injector Dynamics 1000cc Injectors w/ Bosch 044 Fuel Pump and 1 Gallon Fuel Cell
- Rywire Custom Tucked Radiator Setup
- TurboStart 16 volt battery setup
- 12an Coolant Lines with Meziere Pump and K-Tuned Race Plate
- Exospeed Star8 13x9 Fronts and 15x4 Rears with custom Powder Coating
- PIC Performance Drag Coilover Suspension, 16k Front, 12k Rear
- K-Tuned Front Traction Bar with custom weight bar setup
- Solid Spherical Bearing Front Lower Control Arm setup
- Skunk2 Aluminum Rear Lower Control Arms, Skunk2 Front Adjustable Camber Kit
- Hasport K-Series EF Mounts

Rolling Chassis only (vehicle with cage, suspension, hood and 3 piece front) - $5,000
- includes factory dash, drivers seat with 5 point harness

Im sure there is more…of course you will have any help or service after the sale you may need if you purchase the complete car including tuning for a full year and track support if local in the area. There are probably 15 passes total at the track this year (most likely less) and maybe 20 pulls on the dyno on this current setup. Car has run 10.5x @ 128+ mph consistently now with more in it for certain.

*Prices do not include Paypal or any Delivery or Shipping Fees

**If you would like a shipping quote, I need your FULL Address to do so.

***Anyone looking to purchase internationally, we can ship ANY of these parts including the car. Any international sales at these price levels would require you pay with a Wire Transfer or Western Union Payment however...no exceptions.

****I do not get to check my PMs here all that often, so I would prefer you email me "xenocron -at- gmail DOT com" with questions so I can get back to you more easily and our back and forth conversation can be more easily remembered and tracked

Car and all parts are located in Hillburn, NY 10931...right now everything is TOGETHER and running if you would like to see anything in person. I will deliver the complete car if you go that route anywhere within 200 miles of the zip code above, including a Port for Shipping overseas if needed. This is my PERSONAL vehicle, so this has nothing to do with my tuning or parts business. Payment methods I will take are Cash, Bank Certified Check, Wire Transfer, Paypal Personal Gift or Confirmed Paypal Account with Confirmed Shipping Address (you pay fees). I do not want ANY trades thank you for parts. I would consider trades for an as stock as possible AWD Turbo Vehicle (Subaru, EVO, etc).

Right now prices are firm and non negotiable unless you want to purchase TWO of anything, then I will knock something off to help you out. Other offers will not be entertained, I am not desperate and these are all priced to sell as is.

I will add some pictures of the car as I can below this sentence.

 

FS: MSD ignition part number 6600 and coil part number 8250. Parts have only 2 passes on them otherwise brand new! Looking to go COP for next year so obviously I don't need this. Comes with wire from coil to cap and ignition box. Price $250 shipped OBO. PM for more pictures if need be.

 

M&H 26x10x15 Brand new slicks never mounted! Kept in cool dark storage off the ground. Asking 380 shipped in 48 states!

Liberty Final drive 4 hits (4.72) this set comes with two more pinions and extra ring gear....the extras are given free with purchase of the good one.....asking 1000 shipped.....new set comes with upgraded pinion bearing.

210-214-8542 No BS SELLER HERE!

if you have any questions NO EMAILS OR NO MESSAGES PLZ

Pics not loading I can send pics to anyone.

 

Starting a new better build, so I need these parts sold as soon as possible to help fund it.
All parts are in good working condition. Nothing wrong with them. Funding new build is the only reason Im selling them.
All parts are used unless otherwise noted.
Feel free to ask questions. All prices are set. Buyer pays shipping and 3% PayPal fees. You can PM me, email me at sk8ercbing@hotmail.com or text me at 580-304-3840

-Omni 68mm throttle body with thermal throttle body gasket - $70

-Golden Eagle 84.5mm B series Vtec head gasket - -Sold

-AEBS main studs w/ARP nuts and washers. I lost the AEBS nuts and washer and just bought ARP to replace them. Studs are slightly used and ARP nuts and washers are brand new never used. - $70

-Ross Racing turbo pistons with new rings 84mm. I will include both the original light weight wrist pins and the upgraded pins I bought from them. You will notice one pistons dish seems to be wider than the other 3. That one is brand new and never used. I replaced one of the pistons with it because of damage. I called Ross Racing Pistons and they ensured me that it was the same part. The specs on the box for the new piston matches the specs on the older pistons box and the part number stamped on all 4 pistons match. - $200

-Supertech dual valve springs all-motor (installed but engine never started) - $130

-Complete Skunk2 vavletrain (High compression flat faced valves, dual vavle springs and titanium retainers - Sold

-Precision Billet wheel 6765SP turbo w/open T4 .96 exhaust. Ran for 1 1/2 seasons and still worked great. - $550

-T4 Top mount turbo manifold w/44mm tial flange. Awesome quality, made by a performance shop in Wichita. Made close to 700whp with it, still had a lot more in it. - $450

-Precision 750hp intercooler. Has no dents or damage. It is in great shape. - $300

-bogart flylite skinnies. They are in good shape but could use a little polishing, or paint them if you want. I was going to but decided on a different set of skinnies. Rims only - SOLD

 

Hate to do it but decided to part my ways with the import scene to spend more time with the family and put my money in better places.

Everything has one dyno secession and 4 track passes on it. This h2b setup made over 300hp easily.

INEED THIS STUFF GONE!!!! SO MAKE OFFERS!!!

More you buy the cheaper it gets. text me at 7065877278 willing to do some trading for a 450+cc racing style quad cars trucks etc.

LIMITED TIME PRICE INCLUDES SHIPPING!!!!!!
[IMG][/IMG]


text for pictures of anything you would like to see... just to many pictures to post

chassis eg coupe, lexan windows, 14 point cage ready for recertification, willie barr, parachute, one piece axle, kirkey seat, wiring harness, switch panel, fire suppressant system, custom one piece front, gauge panel, aluminum dash, skunk2 pro front suspension, and more $2500

kinsler 62mm itbs with throttle cable bracket,tps mount and sensor, and vacuum canister so u can run map base $1600

jack meyers drag header i just paid $1400 selling for $800
exospeed star 8s 24.5x9x 13s and skinnies $sold
Qsd h2b kit $sold
Bseries axles and intermediate shaft $100
competition stg5 unsprung 4puc "needs new rivets" $100
Aluminum flywheel $100
drop engineering green motor mounts $150
3 h22 90mm 15:1 pistons $100
h22 bme aluminum rods $350
kaizen speed balance shaft eliminator $sold
kaizen speed timing belt tensioner $sold
fluidampner harmonic balancer $200
h22 arp head studs $sold
timing belt $sold
h23 crank 50mm $100
Bensen 90mm sleeved block $500
rlz ported head with extra dome work $800
supertech springs and retainers $sold
Ferrea roller rocker setup with cams and block off plate $900
Valve cover with catch can setup $sold
dizzy $50
misimoto radiator with fans and hoses $150
b16 trans with carbon syncros and spool $600 "can replace spool w/ stock diff"
2gal fuel cell to mount in battery location $100
walbro inline pump $50
rc 1000cc kseries injectors $200
hondata s300 $sold
carbon plug cover $sold
crower timing gears $50
msd blaster coil and sci box $75
nos pro fogger direct port nitrous kit 150-500 shot $300
Omni 70mm tb $sold
Braided brake lines $sold
Front suspension with spindles, subframe, and manual steering rack $100
pedals for manual swap $40
Prodrive b series spool $150
Carbon Hood with all under bracing cut out for eg $80
eg sub frame brace $sold
Autometer tachometer with shift light $30
K20 pistons Brand New!! never even mocked up $225
AEM Fuel Rail h22 $50
Wildwood Pull slave cylinder brand new $50
Aem H22 pulleys $20
SRT4 stock turbo $100
Radiator Fan $20
Eg hatch carbon roof $300
EG custom bumper with carbon lip $100
Intercooler pipe for k series with 50mm tial flange and iat sensor bolt in plate $25
aem external regulator $50
blox external regulator $30

im sure there is alot more that i will post as i notice im missing and i have tons of stock stuff if you need anything just text me!!!

 

1989 Honda Prelude 2.0Si

Price is $1500 Need to Sell

- Converted to Drag Car with NHRA Certified 10pt Cage (Good for 8.50 and slower)

Includes:

- New 6pt Harness
- New SFI 45.1 Roll Cage Padding
- New complete brake lines (not installed)
- New SFI Window Net
- Moroso Battery Box
- All current wiring (with MSD, ECU, gauges, etc)
- Rota Slipstreams on front with MH Slicks
- Includes 5gal fuel cell and fuel lines (not installed)
- Custom H22 Solid Motor Mounts (ESP)
- H22 Shifter Tray and Cables
- Adjustable Traction Bar (ESP)
- 2 sets of hoods and bumpers

- Engine and Trans available for $$$
- Many parts available and will post once I can get some interest on the chassis
- PM, Email, Call, or Text seven one two - three zero one - four nine five nine

Thanks.



Edit More Parts

Everything is OBO and does not include shipping. Need this stuff gone. Prefer Paypal.

Precision 6262SP .82ar Turbo (excellent condition) = $550
SpFab H22 Turbo Manifold (for v44 wg) = $250
Tial V44 Wastegate (new diaphragm) = $175
Tial 50mm BOV = $150
H22 Competition Clutch Twin Disk (with new discs) = $600
OEM H22 Cylinder Head (100k miles with cams) = $200
FIC 1600cc Injectors (Never used) = $275
P06 Vtec ECU with Ostrich and Hulog = $150
H22 KS Tensioner (BNIB) = $90
H22 Intake Manifold with IACV/EGR Block Off = $85
MSD Digital 6 with HVC-II Coil and Tach Adapter = $175

 

GONNA MAKE THIS BRIEF NOT GONAN TYPE EVERYTHING SINGLE THING DOWN BUT CAR HAS BEST OF THE BEST PARTS I JUST sad to let it go CAR RUNS AND DRIVES

i dont mind to part out but car go first and motor only big stuff first
price for the whole car 20 grand but
or ill part out
located in in fort worth texas
my number 702-403-2729


98 acura integra rs JOJO CALLOS front end with hot rod blk paint job
800hp +
gsr motor 84 mm closed deck skunk2 cams
10 point chromoly cage with parachute
only been to 5 track events
built this year
motor was built and tuned by ldl speed shop out of las vegas
turbo kit was built by virtual works racing out of las vegas
t1 gt3 intercooler
billet 72mm bulleyes still under warranty
accufab 90 mm tb with virtual works intake manifold
weld rims
twin 044 fuel pumps ID2000

 

Everything is in great condition, looking to upgrade so this stuff must go. I can be reached at 478-338-2eight4four. All Prices do not include paypal and shipping

B16 Transmission w/ spool, shifts great. Have stock diff if wanted: $700

GSR Head, Fresh out Machine Shop, complete: $450

81.5mm Wiseco Pistons like new less than 200 miles 9:1..: $250

LS Eagle Rods like new lass than 200 miles: $250

B Series T3 BRMS Top Mount w/ Up Pipe + Dump Tube: $700

B18b1 AEBS Shortblock 84.5MM w/ Cp 9:7:1, Eagle Rods, ARP Headstuds w/ one pull, KMS Billet Girdle, ARP Mainstuds. Less than 2000 miles in like new condition. Bolt your head on and go: $2000

Type R Cams: $300

B series Competition Clutch Twin Disc, Mainly Street miles: SOLD

Full Blown Dual Walbro Setup, Brand new in the box withs 2 Full Blown 340 Pumps. -8 + -6
Fittings included w/ install kit and socks. Paind 579 shipped with receipt to show: SOLD

Omni 68mm Throttle Body: SOLD

Moroso 5.5 quart Pan B series: SOLD

 

msd 8261 coil for sale. was using this on my digital 7 ignition box.. worked great.. $100 obo

black golden eagle fuel rail.. like new $90 shipped.. has -8 and -10 fitting but i have other fittings so lmk what you need

borg warner 8375 s300sx t4 .91 with v band from full race. new just bought this 3 weeks ago. never used.


catch can built to fit in EF bay.3 -10 bungs. 5x5x6. $125 obo


B series valve cover with 2 -10 fittings. painted black with purple flake $125



greddy type R blow off valve. $100 obo

 

Selling my Weld Rear One Piece Rear Skinnies Black With Tires 950$ [IMG][/IMG]
precision t4 billet ball bearing 6768 with ported H Cover and vanjen $1250[IMG][/IMG]


Name: Wes Spry
Location :RLZ engineering NC
Cell :704 604 3526

 

MSD pro billet distibutor
msd sc coil
msd coil module
msd sci ignition box
msd 2step
msd wires

for bseries ob2

for sale 550obo
650-219-5553