Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

:new race car build:

ran perfect when i pulled it out to put the new motor in. Pulled it out because I planned on going to MIR and wanted a new motor. Now I need cash for the new race car
Golden eagle Sleeved-oringed
JE 84mm pistons
Manley TUrbo Tuff Rods
Balnced blue printed
HOnda Bearings
hit me up for further questions
email is best contact:-ahobbs@honda-tech.com

 

TB Motorworx B16 Head that came off his Famous CRX that went 10.40s $1000
Another Ported B16 Head by Compression Kings with Ferrea Flat Face Valves & Welded Chambers $550
JG B18 Sleeved Block 86mm Needs rehone .25 over $450
Eagle 95mm Stroker Crank $350
Eagle LS/B20 Rods w/ARP 2000 Bolts @260
B16 Hydro Transmission w/Quaife LSD and 4.4 Final Drive $1200
4 NOS Annular Foggers w/Bungs and Induction-Solutions Burst Panel $200
Quickest Response Text or Call me @ 951-570-7983
-Dan

 

BMC Race 6 liter Intake manifold.
Single injector setup
90mm throttle body flange
Includes Full Blown fuel rail.
5.5" runners.

First come first serve!
$850 shipped lower 48.

Now $775 shipped or ill be adding 4 more injectors

 

Summit racing 5 gal fuel cel $110 shipped
peakboost 3" top mount downpipe with cutout $120 shipped
custom topmount 3" race downpipe with vibrant muffler 2 bungs $100 shipped
3" muffler new $60 shipped
3" vibrant muffler/resonator $80 shipped
3" rice chamber $40 shipped
3" custom vband test tube $55 shipped
Tein basic coilovers used with eg hats. surface rust removeable. $450 shipped
HPS cold air intake pipe $60 shipped
CX racing oil cooler kit and new oem filter, test fitted but never used $120 shipped
D series cast t3 manifold $60 shipped
used mfactory shaft brace cuff with new shims $130 shipped
momo steering wheel and hub $120 shipped
autometer carbon fiber speedo 3 3/8 $160 shipped
autometer carbon fiber tack 3 3/8 $130 shipped
autometer carbon fiber volt gauge 40 shipped
autometer carbon fiber fuel level works with oem sending unit. $90 shipped

black anodized bezel rings fits the above gauge sizes. $25 each

Virgin p28 ecu $110 shipped
44mm straight dump tube $25 shipped
OEM fuel tank straps new EG $30 pair shipped

huge intercooler $150 new

Blank intercooler end tanks 12x4 $60 each

Garrett T3/67 HO turbo has bad shaft play no smoke, but needs rebuild $450
on the right of a BWs300sx

If you do not see and its honda or turbo related ask for it. I have a lot of parts just haven't got around to posting them... need to make some cahnges in my car buy some stuff help my funding.

 

For sale all parts for h22

Ati race damper h22 part number 918469 375 shipped



rcautoworks mini ram horn manifold h22 t3 44mm vband wastegate flange 400



I have two different intercoolers sitting around I have a spearco one that I bought off a member on here he said it was efficient to 750hp I'd like 250 shipped. The next is a treadstone intercooler id like 100 shipped for it. If interest I can measure them and give you exact dimensions.

 

Contac me on pm's or text 904-343-9580

Tial 44mm wastegate with flange to weld onto manifold $275obo


Precision PT6765 used minor/normal shaft play $575obo

 

**Updated** PLEASE PM ME IF INTERESTED

Precision 6765 journal bearing turbo t3 with 2 seasons on it. $600.00
Synapse Turbo Manifold T3 Top-mount $650.00
Precision 46mm Wastegate black top and dumptube $250.00
*Buyer also pays for the shipping*
If you were to price all of this out it would be way more than this!

PACKAGE DEAL: $1450.00 + SHIPPING






EG Carbon Firbre "Spoon Style" Duckbill Wing: $80.00 shipped to lower 48 states





OBD 1 Socketed ECU by Xenocron with eCtune chip that has a tune on it: $150.00 + shipping, works fine I had it in my car but I am now on Neptune so there is no need for this ECU

 

AFI top mount manifold..bout 20 hits...1050/obo
4 inch intercooler custom backdoor .. with piping for eg..350..obo
car made 800whp 29 psi 6765 precesion
sell everything for 1300..
buyer pays shipping and paypal fees
305-527-1185..TJ..for more pics..need gone asap

 

Item Description: .
1st gen Blueprint stage 3 cams with TSX cam gears. - $300
When i received the cams, one side had scratches on the surface. I sent them out to Delta Camshaft to have them repaired and they have about 2000 miles on them after the repair.

Buyer pays shipping and paypal fees

Photos: .

 

got a set of rc750cc injectors $200obo
also got a competition super single clutch for k series $450obo only 3 passes on new disc
any questions text me at 4694712344

 

Last October I became a dad, and I found out this summer that priorities have changed. All engine items have less than 5,000 miles on them. I can get more pictures if needed.


Clutch Master b-series small spline twin disc. 1990-1991 integra- $450

Xenocron OB0-OB1 adapter harness- $50

1991 Integra shell, has a s&w ten point cage, Lighter-Faster sunroof plug, Skunk2 drag coilovers, ETD traction bar, sumped tank, dash, door panels, headliner. Have title- $2,000

 

Hit me up on my cell 203-947-1505 prices are obo!!!!
Precision 6262 journal bearing billet wheel turbo only a handfull of dyno pulls at 18psi SOLD
AFI ramhorn with down pipe and waste gate dump tube t3 44 mm gate SOLD
Godspeed 3"core with pipes and hks bov with all necessary clamps and couplers SOLD
Custom switch panel built for radio spot on dc2 $150 in switches want $125
Pro products 68mm throttle body $150
Hondata 4 bar map sensor $100
Bnib aem 4 channel coil driver $150
Precision 880cc injectors b series SOLD
Precision 1600cc injectors k series $300
4"velocity stack $40
Hasport eg dc b series mounts $235
Aem water temp gauge $150
aem boost gauge $150
Aem wideband SOLD
Autometer 5" tach w/shift light $100
autometer external shift light $50
brand new b series dizzy no cam key obd2 $150
dc2 carbon door sills $100
hallman pro boost controller red $85
Corbeau race seat super comfortable like new condition ( no rails) $300
ITR tranny brace $50
ITR trunk bar (under taillights) $50
autometer dual pillar pod color matched to factory pillar and comes with oem pillar attached so you dont have to drill yours!! $60

FOLLOW LINK TO PICS

http://hondamarketplace.com/showthread.php?t=3099097

 

changing plans a little so selling a few things.

first is a AFI FMIC its pretty big. bought it from my tuner a few monts back off his car that never got finished. was told it is a 1300hp capable unit. honestly do not know how much it is really worth or what it cost him. never had air threw it. just mounted on his car.
looks like it got dropped one inlet has a little dent nothing major that cant be fixed with no problem. only selling it because im going with a forward facing manifold and this simply will not fit.
800shipped+paypal fees OBO






richmond spool bought from godfatherofboost a few months ago. not going the spool route anymore
fits GSR trans
$250shipped + paypal fees



PTE 6765 exhaust housing T4 flange
125shipped+paypal fees OBO

 

Asking/Offering Price: Listed with item decription
Email Address/Phone number: (316)871-4456
Zip Code: 67218
Pics: Below
Name: Justin
Item Description: Below

C.O.P. Setup (harness and 4 cbr coils/ 4 AEM coils) $200 shipped
Magnus Motorsports GSR Intake Manifold $550 Shipped
AEM Fuel Rail $100 shipped
Ericks Racing 70MM throttle body $200 shipped
AZ Race Machine block girdle $75
MAD Engineering B-series-EF mounts $50 shipped
Catch can setup with 5 inlets (-10an) with all hoses $125

 

Call or text 360-632-9972

4" bell mouth $40

Toda B cams $450


Pro Drive Spool $300

Gator stage 3 axles with hubs $600

water box 16x12x10 with -16 fittings $200

Power FC with commander $450

MSD Pro coil $40

Earls 19 row oil cooler $130

MSD 2 Step $30

RCI seat belts blue $75 for both

Password JDM LS intake Gasket New $25

Sparco 2" seat belt blue $40

__________________

 

p72 with s100 $150
4" uppipe with vband thermal coated jet black has two o2 bungs-sold!
aem 6050-$950
b16 crank has knick in the journal-25
str cam gears and ls greddy timing belt-75 for gears and 30 for belt
exedy twin disc-750

 

I can also email or text pictures to searious buyers. ALL PARTS ARE NEW UNLESS ITS NOTED THEY ARE USED.
I want out of the game and want to pay off a few bills to free up some cash.

BLOCK: $3500 (this setup cost double my asking price)
FRESHLY BUILT 0 MILES. 1000hp capible setup!!!!
DART 1.8L HONDA BLOCK
84.5MM o-ringed
Pauter rods
Je 9.5:1 pistons
ARP hardware
Gsr crank
ACL bearings
Moroso 5qt aluminum pan with pickup

HEAD: SOLD!!!

TURBO KIT ITEMS:
Full race t3 ram horn (used) $600
Full race 3" vband downpipe (used) $200
Precison 750hp intercooler (used) SOLD!!!!!

TRANS: SOLD!!!!!!!!!
Exedy Twin SOLD!!!!!!!!!

FUEL AND IGNITION:
AEM EMS 1060 $750
T1 hall sensor kit with cam gears and ls1 coils SOLD!!!!!
AEM fuel rail $100
AEM 3.5 bar map sensor $100


MISC:
Skunk2 shifter $70 I believe it woks for 88-00 Honda/Acura
Skunk2 PRO Front camber kit (SOLD!!!!!!)
Skunk2 Raer camber kit (SOLD!!!!!!)
Skunk2 mega power RR full 3" exhaust $500 92-00 civic
Fluidyne Radiator With slim fan (used) $225 92-00 civic (not sure what else)

 

ok so new motor had a piston issue after just 5 passes 0 street miles. so im parting it out.

84mm golden eagle sleeved b16a2 block 1 cylinder has scratches needs honed .5mm. $500.00

eagle b16/ls/b20 rods with arp 2000 bolts $200.00 shipped super clean like new! mint

act light bseries flywheel $120.00 shipped

arp bseries vtec head studs 1 torque session $60.00

CLEAN b16a2 crank std size $200.00 shipped. unless its outrageos distance to ship.

txt or call anytime 5757493103 rock

thank you




[IMGhttp://imageshack.us/a/img823/2527/flywheels.jpg[/IMG]

 

Garret/precision 72/75 with 1.01exhaust housing$1800
Weld wheels 13x10/m&h 24.5x9.5 $sold 2 passes only still has stubs on them
M&w pro 10 crane coil/harness-dizzy$ 600
Weldon 2035a fuel pump low hours$ 600
Avid solid mounts mint$ sold
Avid torque mounts with tranny/ac brac$100
Comp twin disc still new used for one burnout then tranny shxt bed $900
3gal fuel cell replaces battery $200
Ati damper sold
Hondata s300 $500
Radiator w/custom stroud &fan200$
SOLD-manley turbo tuff rods acl race bearings-82mm wiseco 10-1 flat tops upgraded pins, aebs sleeves oringed ls block w/ gsr head ported&polish supertech springs retainers/valve guides, valves & Nrg tech magic stick cams . All machine work & assembly done by Chris miller 3 months ago & head by local machine shop . Set up made over 915+ to the wheels @34 psi 500+torque .. $3500 for long block
203-278-2806jb

 

Brand New Borg Warner S300SX 363

63mm turbo 750hp rating
T4 undivided .88 turbine housing

$700

925.586.seven3seven1

 

Up for sale a 72mm t4 divide precision 4272 turbo with 110 hot side same turbo I'm using on my 1050whp h2b just need to be rebuild the hot side Bearing is no good but cold side bearing it's good
I was going to send it out to precision to get it fix for a my back up turbo but I can use the cash now 1,500 shipp or B/O any?? Text or call 978-995-2377 zakura

 

706-346-6024
matt.stover@comcast.net

Waste-gates are both SOLD


Precision 6766 JB, 1.32 divided T4 exhaust housing. filtered Brad Penn oil via GE sandwich plate the whole time. Few nicks on comp wheel, nothing major. Awesome Unit. Bought in February 2012, used for 3-4 TnT's and 5 events.
Since the turbo was still under warranty, i sent it off to make sure everything is okay. Needless to say they went ahead and refreshed the journal bearings so it will basically be pretty new except the few dings on the comp wheel as photos show. It will be back home on Monday the 26th of Nov.
$850






Custom Top Mount Manifold fabricated by a well known Atlanta area fabricator. Built back in the winter of 2009, NEVER had an issue with cracking or anything. This thing is a TANK! I've had T67's, S372's, and Precision 6766 turbos on this thing no problem. All Tig Welds with all Stainless except flanges
-T4 Divided Flange and Collector
-Dual 44mm TiAL Flanged
$600 plus SHIPPING

Custom Garrett Core'd Intercooler
$750






Aeromotive Pro Pump - Flows a shitload
$525



-Precision GT4272R, 1.28 divided T4, 4" outlet
$1675
-Custom Forward Facing Turbo Manifold, Selling for someone else, test fitted on my car to show pictures. Fabricated by Joe Simpson at Tempest Racing.
With 4" SS Downpipe
Flanged for 60mm Tial
$1200









Liberty's Gears 1st generation 3rd gear, countershaft side, 34 teeth, 1.36:1
I no longer need to keep it as a spare
$100 OBO

 

a1000 fuel pressure regulator with gauge - 120
k tuned bullet tps -120
cc twin disc clutch -900
eg k motor mounts- 375
shifter box with plate and cables - 300
aeromotive 340 lph Fuel Pump - 120
ID 1000 injectors - 400
dc,ek,eg full blown dual fuel pump setup with 2 walbro 255lph- 400
brand new RLD t3 top mount manifold with 44mm wastegate flange for b series - 650

 

1. GSR S80 hydro trans with pro-drive spool already installed. $550 take it! **Scatter shield sold already.



2. spark racing b series turbo manifold t4 flange w/ 3" down pipe $250 made over 600whp with this manifold