areomotive -10 an outlets fuel pressure regulator (red&black) $120 OBO
id 1000 injectors w plug $ 350 obo( 500 miles )
jdm eg center console with jdm arm rest w cup holder $350
walbro 255 intank pump $50
99 si cluster retro fitted to fit eg like stock $150
eg 3" coldside 2 peice with tial 50mm blow off vale flange $150

pm me for any info or intrest

 

Big K-Series All Motor Parts
Jerrybuilt K series Scattershield $100

RyWire MilSpec Harness with 8 injector Option & AEM Coils $1000

Clutch Masters FX700 Twin Disk $800

(8) Bosch GP-750/1000CC Injectors $300 set of 4

ATI Super Dampener Crank Pulley $325

AEM Pencil Coils and AEM Twin Fire Ignition Package Deal $450

PARR Dog Box Tranny w/Quaife LSD 4.7 Final Drive $5,000

ANY QUESTIONS ITS FASTER TO TEXT ME or Call or email
dcsprophoto@yahoo.com
NO LOW BALLERS this pricey ****
and was barely used only 4 passes on everything
-Daniel
951-570-7983

 

Located in Florida
Paypal Verified!!
No Trades!!



Integrated Engineering Billet Surge Tank w/ corrosive updrage, for Submerged 044 Pump Brand New Sealed $300 Shipped

 

t3 PTE 6766 .82 journal bearing.bought new from speedfactory. now has 400 miles on it daily driven. zero shaft play. has vibrant 3" discharge and 90 degree elbow welded on.
$700 obo still under warrenty






nitro performance 4 port catch can powercoated black new $150 obo



used mt slicks 12 passes 24.5/9/13 $150 obo


m&h 235/60/15 bias ply tires 300miles $200 obo

 

hey wasup guys....im moving on to another project and im parting out my civic...everything is in great condition and if u have any questions u can reach me at 305 281 6495..i have sold many parts on here for a long time so u can buy with confidence...if intrested in anything u can contact me at 305 281 6495...everything is in excellent condition!
full ppg 1-4 dog box $7400
AFI turbo kit with BWs400 $4500
erl sleeved block...11;5;1 compression, big bolts manley rods, s2k oil pump,fluidamper pulley,s2k oil pump,golden eagle head studs, everything but my head..$3700
Beadlock Exospeeds star8 with slicks(3 passes) $950 sold
spinwerkes skinnies $550 sold
Built A2 head ferrera rockers,supertech valves, springs, retainers,$1800 or with cams $2500
DragCartel Cams4 $850













video

 

**::Attention, Email is key, joone.nijjar@gmail.com:**

Hello Folks, It has come to that day that I am actually parting out my racecar. I thought this day would never come but unfortunately it has. Here is a chance for you to pick up some quality parts for great pricing. Everything has low miles on it (between 20-30 total miles) and was kept in exceptional condition. Take a look and feel free to inquire.

p.s. I will keep this thread up to date whenever I sell something, so far stuff has been moving. Feel free to make an offer and if it works, I will get the stuff ready to ship. Thanks in advance.

* ITR Shift Linkage with a BNIB Energy Suspension bushing kit included

* MFactory B16 LSD with bearings

* 4.9 Gear-X Final Drive kit for B16 trans

* Momo Monte Carlo Steering Wheel with Mugen Horn Button and NRG Quick Release as a set.


* Seat Rails & Sliders for Driver and Passenger Side, EG/DC. Used with Side Mount Seats.


* Autometer Oil Pressure Gauge with Sender Unit, Autometer Water Temp Gauge with Sender Unit, and carbon Fiber bezel with slot for one more gauge. Fits into Radio din or Climate Control Slot on EG.


* Skunk2 Oil Cap


* H22 Timing Tension Conversion Complete


* JDM h22 Distributor wired for MSD external Coil. Includes MSD spark plug wires.


* H22 ARP head stud Kit with Lube, used


* ::Low Miles:: H22 oil pump bought brand new, Pro-Drive high pressure Oil Pump Gear installed, Kiazenspeed Balance Shaft Eliminator Kit installed.


* 1996 JDM H22a closed deck block Sleeved with Darton replacement sleeves, 89mm bore.


* ID725 injectors for a Honda K series engine with low miles as well.


* Skunk2 K series 74mm TB with sensors and IAC Block off plate.



* Golden Eagle Oil Sandwich Plate




****SOLD to a Fellow H-T'er**** Thanks "DrCRX"
* H22 Carrillo Rods
* 89mm 13.5:1 CP pistons with relocated wrist pin for use with H22 rods and H23 crank. (20-30 miles tops!!!)

****SOLD to a Fellow H-T'er**** Thanks "92frostwhtdb2"
* PLX Wideband with Gauge.

****SOLD to a Fellow H-T'er****
* Hydro B series Clutchmasters twin disc fx700 Clutch
* DSS level 2.9 B-series axles.

****SOLD to a Fellow H-T'er**** Thanks "92siracer"
* H22 Valve Cover properly baffled and vented. Only releases pressure, not a bunch of oil...
* Custom h2b Scattershield powdercoated Silver

****SOLD to a Fellow H-T'er**** Thanks "Souler"
* Billet Aluminum coolant overflow catch can.
* MSD SS blaster coil
* MSD Digital 6 Ignition System

****SOLD to a Fellow H-T'er**** Thanks "richboy84"
* B&R Catch Can with lines

****SOLD to a Fellow H-T'er**** Thanks "H2BJON"
* Skunk2 k20 Fuel Rail with -6 fitting for fuel in

****SOLD to a Fellow H-T'er**** Thanks "MyLilCivic"
* SSR stainless steel 4-1 race header with bottom exit megaphone for an h2b with an h22 head.

****SOLD to a Fellow H-T'er**** Thanks "weedstnr"
* KStuned h2b Oilpan with pick up and dipstick, no dings/dents/damage.

****SOLD to a Fellow H-T'er**** Thanks "fliplude95"
* Blox Racing EG/DC Traction Bar
* XS FPR with -6 fittings in black.
* H to D series alternator relocator bracket with Alternator and belt
* h22 Euro-R Single Row Crank Pulley

****SOLD to a Fellow H-T'er**** Thanks "lovitalracer"
* Bogart Pro-4 wheels and tires. (car always rested on Jackstands) 4x100
Fr: 24.5x8.5x13 M&H slicks on 13x8 wheels (Back spacing clears brakes as large as Integra GSR/LS/RS/GS
Rr: 24.5x3.6x13 M&H skinnies

****SOLD****
* STR70mm B/H/D TB with sensors-

****SOLD****
* Skunk2 H22 Pro series stage 3 Camshafts**
* Skunk2 H22 Pro Series Cam Gears**
* DNR Ported h22 Cylinder head, includes SKunk2 Valve Train and Supertech Flat Valves.**

Email is the key: joone.nijjar@gmail.com

 

Parting out my turbo race car everything is for sale. The parts are all almost brand new minus the ones i specify, Everything was bought new, used for 3 dyno sessions and 3 events with a total of 7 passes.

!!!!!!! LOWERED PRICES ON MOST STUFF !!!!!!!! 11/12

Simpson Medium Size Helmet $175 (looks brand new just one small ding from hitting my head on roll cage trying to get out of the car)



Simpson Large Jacket $200(used twice, no smells or odors or stains looks brand new smells brand new)



Simpson Large Pants $170



Simpson Neck Brace $30



Simpson Bag $30 ( dicontinued model, made for helmet but i personally kept all my clothing and accessories inside)


Crow Large Gloves $50 ( lightly used )



B Series Vtec engine harness $200 ( harness was modified, i got rid of all the plastic conduit and replaced with some high quality heat shrink. I also eliminated anything that wasnt being used on the harness, my car didnt have a IACV so it does not have a connect for it)




Skunk 2 Rear lower control arm $165.00


Skunk2 Front Camber Kit $160




New Honda Fuel tank with modified stainless steal sump $160 ( Local pick up preferred on this one )


Moroso Oil Catch Can $80


Valve Cover + Catchcan and Lines $280




RPM Throttle Body 68mm $150



Greddy Type S Original BOV $100


Golden Eagle Scatter Shield $180


SLS Twin Scroll T4 Manifold w/ dumptube $1050 (downpipe NOT included )



Tilton Ceramettlic Twin Disc for B series $900(price drop)




MSD Digital 6-Plus Ignition Control $180


Cusco Master Cylinder Brace $60


Innovative B series Driver Side Motor Mount $50



Place Racing B series Transmission Motor Mount $50



Moroso 5.5Quart Oil Pan w/ Oil pick up $260







JG B series Intake manifold (modified by Bubba at Do-It Dyno) Also eliminates Idle air control valve $350






GSR Distributor w/ MSD Cap $140



B Series Alternator w/ AEM pulley $60


Golden Eagle LS-V Sandwich kit with fittings and oil line $80


Vibrant Boost Brace (1 aluminum and 1 steel set) I used 1 nipple on the intercooler (aluminum) and 1 on the intercooler pipe (steel) to ensure i would not pop intercooler pipes and have to take the bumper off. $20 each



L-Con Traction Bar (modified to hold radiator and hook straps to it ) $150


CP Pistons 81.5mm 9.5/1 Compression w/ Probe Ultralight rods, """these i am selling for a friend) (will have to replace one but the others should be fine. Pistons have 500miles on them max. same with rods. $50






Heres a link to the rods and exact part number:
http://www.probeindustries.com/Probe...th_p/12042.htm



1992 Honda Civic DX, (clean title) Painted recently olive green, most window seals and moldings outside the car and on door and window are brand new bought from dealer, all bushings including trailing arm bushings have been changed to polyurethane, cage was done by Steen Chassis including the seat brackets made for Kirkey Seats ( included ), the cager is by far the cleanest and tightest cage I have ever seen, nice fitting duckbill ( no gaps or height issue) carbon fiber hood included + original hood, Momo wheel. $5000








Any questions call Alex (818) 279 5202

 

hey guys im getting rid of my full race top mount setup to get a forward manifold everything has dyno time and about 20 passes 8th mile i wanna sell as a package or if i can get all things sold before i part it out 38mm tial wastegates comes with more springs and another set of clamps for dump tubes they have 7 psi springs in them now this setup made 678 at 28 psi and i ran out pump turbo is borg warner 9179 s300 with 1.10 ar


Manifold sold to bbrian
turbo-575 shipped gift or 600 shipped no gift
wastegates sold to pettyboy69

 

FS: AFI front mount turbo manifold for B-series. Setup is divided T4 w/ Tial 44's. manifold comes with up pipe and dumps. Also comes with egt bungs and tubes/fitting and baffle to monitor exhaust backpressure. Sensor not included. Prefer local pickup, but will ship at buyers expense.
Fab work done by Synapse Motorsport.

$1500 obo






FS: Bullseye Power turbo S372r comp R 72mm. Has 1.25 A/R housing and it has been ceramic coated by STC. I made 930whp at 35psi. Only has dyno time and a handful of track passes. Never used on the street. Includes all oil fittings. Still have the original box it came in. Tubing was used to monitor air inlet pressure. Also comes with exhaust tubing clamp.

$1100 obo



Any questions feel free to ask. Just send me a PM.
Chris

 

Looking for a more streetable turbo. So im selling my garrett GT4294R. Dual ball bearing, Polished ceramic coated exhaust housing, 1.15A/R. Black powder coated compressor housing. Turbo is in EXCELLENT shape and has 1 dyno session on it where it made 957whp. Im looking for a GT3582R and some cash, Or a ball bearing 6262, or 6266. Or sell outright with clamps and flanges for $1600. Any interest feel free to text me 509-496-8108



I have a Nearly new Precision PT1000 liquid to air intercooler that has tabs for mounting welded on it and powder coated black. Its rated to support 1000 horsepower. Its got 3" in and out for the charge air. Also comes with a hand made 5 gallon water tank with -12AN in and out fiitings and is baffled on the inside. also has a ball valve on it to let the old warm water out. Also comes with a Bosch Water pump that made for the Ford Lightning for the liquid to air setup on the lightning.With -12 lines it was filling a gallon jug in about 8 seconds. Couple of water lins with fittings. Asking $700obo for the whole setup or trade for a nice air to air intercooler.

509-496-8108










I would also consider trading the whole turbo setup (turbo, manifold, wastegate, intercooler, pump, lines, clamps, flanges, up-pipe) for a nice streetable turbo kit. Like a decent topmount with a single 44mm gate, or at least a nice name brand ramhorn, Ball bearing 6262 or 6266, or a GT3592R, wastegate, downpipe, A2A intercooler.





Manifold is a hand made Forward facing, divided, T4 B series manifold made out of Sch40 Stainless.







Has a Precision 66mm gate with all the springs and fittings. Is in brand new shape.







So what im looking for is something good for about 650-700hp. Ball bearing precision 6262 or GT3582R, single gate top-mount or good quality ram-horn at least, nice quality A2A intercooler. There is absolutly nothing wrong with any of this stuff, just decided to make the car more of a fun street car rather then an all out drag car. Any questions or interest, plese feel free to text or call me. Can send more pics.

509-496-8108

 

I have a used s372r with couple 5 passes and a coupe dyno runs. Turbo is in great shape hardly used with polished housing. This turbo will make 800-900+ with right setup. Asking 840 shipped.

 

FS: BNIB FCS 5 Gallon fuel tank, with optional dual in tank walboros. -400

 

F/S Used Precision T3/.82ar billet ball bearing 6765 turbo. The turbo is in great condition and has no issues what so ever. Could say "like new" 1000.00 SOLD!!!!!!!


-Borg Warner turbin housing Twin scroll 1.10ar for S400SX 71mm turbo. 110.00 New never used!

-Injector resistor box plus OBD1 injector clips. (USED)25.00

-MF2 Mappable Injector Driver can control either additional fuel injectors or water injection and 2bar map sensor.

 

kinsler modded 800cc high inpeadance injectors great injector will include clips 170 shipped out..set of 4

 

Michael Santiago
Pleasanton, CA
925-519-7914 (txt or pm first please)
$1100shipped OBO.

DBB 6262. T3 .82AR 4-bolt. Water lines included.
maybe 5k miles tops. Realistically, 3-4k miles. zero shaft play or wheel damage. Selling to go smaller since I want to tone the car down a bit.
No trades.

Flexible on the price a bit, so feel free to shoot an offer.






compressor close up


turbine wheel closeup

 

delete post moved, added to it, and pictures wouldnt work

 

Sold
thank you

 

sleeved ls block with je 9:1 pistons with ls crank and main caps
http://s1305.beta.photobucket.com/us...03118618832902

benson sleeves

 

Here is the list of what all i have for sale! Pictures readily available just pm me or email steve@kseriesparts.com! Shipping not included

AEM 30-2010 EMS Sensor 1 $41
AEM 30-2400 Boost Control Solonoid Kit 2 $72
AEM 30-2906-18 AQ-1 Data Logging System 1 $120
AEM 30-2130-100 EMS Sensors 2 $117
AEM 30-2065 K-Type Thermocoupler Kit 4 SOLD
AEM 30-2853 Smart Coil 4 $60
AEM 30-2310 Universal Inline Wideband Controller 1 $145
AEM 30-2905-96 Harness w/ Fuse Block & Main Relay 1 $195
AEM 30-2066 K-Type Thermocoupler Wire Extension 4 SOLD
AEM 30-2064 Exhaust Back Pressure Sensor Install Kit 1 $185
AEM 30-2130-75 5-Bar Map Senso 1 $118
AEM 30-6905 EMS 4 1 $620.00
AEM 30-2500 AQ-1 Data Logger No Harness 1 $280
AEM 30-2204 Thermocouple Amplifier 4 Channel 1 $250
AEM 30-2710 Peak and Hold Driver 1 $200
AEM 30-2204 Thermocouple Amplifier 4 Channel *Used* 1 $200
Precision PTP074-3045 Turbine Discharge Flange 1 $90
Precision PTP074-3042 Compressor Cover Discharge Flange 1 $110
Precision PIN052-1121 Intercooler Flanges 2 $50
Precision PIN052-1120 1 $50
Precision PBO085-2106 1 $25
Vibrant 2601 2 $40
Weld Wheels 15x8 5x4.5 Lug (Polished) 2 SOLD
4x100 Steelies 2 $25 (Pair)
M&H Racemaster 10.0/26/15 2 $350 (Pair)
Weld Skinnies (Black and Polished) 2 SOLD
Weld Beadlock Wheels (Black and Polished) 2 $1660 (Pair)
RaceTek Seat 1 $2,000
Grant Steering Wheel w/ Strange Hub 1 $125
Quartermax Battery Charge Hook Up 1 $25
Autorod Controls 1 $350
Jazz Pro Cell Fuel Cell 1 $305
Wilson Manifolds 90mm TB w/ TPS and Gasket 1 $360
Full-Race Twin Scroll Manifold 1 SOLD
Lithium Pro's 16V Power Pack w/ Charger 1 $1,260
DriveShaftShop Pro Level RSX Axles and Spline 1 $1,800
Roll Cage Padding 1 $510
Aluminum Tubing 1 $430
Precision Water to Air Intercooler 1 $1,500
Treadstone Intercooler Core 3 $160
Precision 46mm Wastegate 1 SOLD
Humphry Boost Control Solonoid 1 $50
Jegs Roll Cage Helmet Hook 1 SOLD
MoTec PDM15 1 $2,202
Ksport Air Jacks 1 $1,050
RacePak UDX 1 $500
SafeCraft Fire Extinguisher Kit 1 $300
Competition Clutch Twin Disc 1 SOLD
Weld 13x9 Wheels 2 $600 (Pair)
Carbon Fiber Rolls 1 $1,075
Hayward K Series Manifold 1 $1,655
Depo Civic Black Housing Head Lights 1 $225
Dynomate Liscense Plate Frame 1 $5
EP3 ECU 1 $250
05-06 RSX ECU 1 $100
Stroud Window Race Net 1 $100
Clutch Switch 1 $50
RJS Harness and Hardware 1 SOLD
Stroud Parachute and Accessories 1 $580
Polished Fuel Cell 1 $350
SPAL Fan 1 $10
Mishimoto Fan SOLD

 

Precision 7285 Turbo For Sale. PM me or email steve@kseriesparts.com

- 72mm CEA Compressor wheel
- 85mm Turbine
- GT-42 Frame Size
- T4 Divided
- 1.28 A/R
- Dual Ceramic Ball Bearing

- Asking $3000 OBO

 

FS: Weld 1 piece 4x100 forged rims with M/T 25x4.5x15 tires = $1200 firm

Weld 13x10 with custom beadlock 5inch backspace w/ 24.5x9x13 M/Ts with 6 hits = $1100 firm

email or text sheepey85@hotmail.com 951 322 2798

 

DSS 2.9s $450


700hp Turbo Set Up: Ramhorn Manifold, Precision 6262 Billet Journal, Turbosmart BOV, Turbosmart 38mm wastegate, Big No Name Intercooler, 2.5" piping for EG all Bead Rolled Ends, Couplers, T Bolts, Down Pipe, Dump Tube, all you need is oil lines and vacuum lines. $1900


Avid Urethane Mounts For B Series Hydro EG

 

Up for sale i have a used k series fx725(700) twin disc. The clutch has about 200 miles on it before my engine came apart. I am selling due to the financial costs to rebuild. I am asking 1000 SHIPPED OBO. No reasonable offer would be ignored. If you have questions feel free to email me at wiz321654@aol.com... If you need more pictures just do the same. Thanks for looking.







the light scrapes on the pressure plate are from the disc rubbing onto the transmission housing when everything let go. The clutch is still in perfect working condition.

 

Liberty 4.7 final drive for sale 15-20 passes on it $800

Co2 bottle with gauge and mounting bracket $100

Skunk2 racing cams, cam gears, valve springs, retainers all brand new all for $1,100 +shipping

 

BNIB AEM EPM 30-3255 **$250 shipped BEST OFFER** Price Drop 11/18
Only used for mock up never ran.



AEM Pencil Coils


Both EPM and Coils $400