**skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#1153
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Thanks for the words man
Thanks mang. I had bad experiences with some shops so doin it all my self I have learned a ton and get stuff done how I want it with a lot less money outta my pocket
More parts on the way! Stay tuned
#1154
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
So unfortunately didn't get much done on the car. Took it easy before startin a new job this morning.
But I got a nice little order from Honda.
Mostly a lot of the little gaskets I need to finish puttin the engine together
And here's a throwback shot of the car from last summer for ya'll
But I got a nice little order from Honda.
Mostly a lot of the little gaskets I need to finish puttin the engine together
And here's a throwback shot of the car from last summer for ya'll
#1155
Honda-Tech Member
Join Date: Jul 2009
Location: oly, wa
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
damn forgot what it looked like on the ground. Gonna lok sick with the new additions to the exterior hows the new store?
#1156
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#1158
Honda-Tech Member
Join Date: Mar 2008
Location: NW
Posts: 2,000
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Coop! Get that sucker on the ground, haven't looked back in your thread to see the older rolling shots/full shots for a while, and it looks so damn fresh. Should be even better once it's back on the ground
#1159
Honda-Tech Member
Join Date: Dec 2006
Location: Dallas Texas
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
plaayyaaaa ive been without a comp for like a weeek and you aint done ****!! haha jk but ya im ready to see this girl back on the road.
sooo you work at a store O.o
sooo you work at a store O.o
#1160
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I am thinkin about it just because it rains so damn much up here in the NW and with no AC my car gets muuggy lol. But I do like the no visor look, what you think?
Man your tellin me! Cruise down and help me put this bish together when you get your RNR's!
Hahaha I'm sorry man I hate to disappoint. I got sick this last week and have just been drained from that and working.
I work for Starbuck's Coffee and I am a supervisor in one of there stores. I have worked there goin on 4 years and just switched to a new store this week. It's kind of culture shock because I came from a store w/o a drive thru that made $9-1500 a day to a store with a drive thru that makes no less than $5000 a day! It is always busy all the time!
I'm working my way to management so I gotta be able to work a higher volume store to see how I can perform. If I can work this store I can work anywhere. It's a make or break you kind of store. They have high turn over percentage because so many people quit lol. The first couple days weren't too bad but we'll see how it goes as it gets into the weekend.
Check back for updates sooon!!
I work for Starbuck's Coffee and I am a supervisor in one of there stores. I have worked there goin on 4 years and just switched to a new store this week. It's kind of culture shock because I came from a store w/o a drive thru that made $9-1500 a day to a store with a drive thru that makes no less than $5000 a day! It is always busy all the time!
I'm working my way to management so I gotta be able to work a higher volume store to see how I can perform. If I can work this store I can work anywhere. It's a make or break you kind of store. They have high turn over percentage because so many people quit lol. The first couple days weren't too bad but we'll see how it goes as it gets into the weekend.
Check back for updates sooon!!
#1161
Honda-Tech Member
Join Date: Dec 2006
Location: Dallas Texas
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I am thinkin about it just because it rains so damn much up here in the NW and with no AC my car gets muuggy lol. But I do like the no visor look, what you think?
Man your tellin me! Cruise down and help me put this bish together when you get your RNR's!
Hahaha I'm sorry man I hate to disappoint. I got sick this last week and have just been drained from that and working.
I work for Starbuck's Coffee and I am a supervisor in one of there stores. I have worked there goin on 4 years and just switched to a new store this week. It's kind of culture shock because I came from a store w/o a drive thru that made $9-1500 a day to a store with a drive thru that makes no less than $5000 a day! It is always busy all the time!
I'm working my way to management so I gotta be able to work a higher volume store to see how I can perform. If I can work this store I can work anywhere. It's a make or break you kind of store. They have high turn over percentage because so many people quit lol. The first couple days weren't too bad but we'll see how it goes as it gets into the weekend.
Check back for updates sooon!!
Man your tellin me! Cruise down and help me put this bish together when you get your RNR's!
Hahaha I'm sorry man I hate to disappoint. I got sick this last week and have just been drained from that and working.
I work for Starbuck's Coffee and I am a supervisor in one of there stores. I have worked there goin on 4 years and just switched to a new store this week. It's kind of culture shock because I came from a store w/o a drive thru that made $9-1500 a day to a store with a drive thru that makes no less than $5000 a day! It is always busy all the time!
I'm working my way to management so I gotta be able to work a higher volume store to see how I can perform. If I can work this store I can work anywhere. It's a make or break you kind of store. They have high turn over percentage because so many people quit lol. The first couple days weren't too bad but we'll see how it goes as it gets into the weekend.
Check back for updates sooon!!
wow man thats cool sounds like you already got your management job in the bank so more parts to come!
#1162
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I don't think I've put this up yet since I got the new arm
OEM ITR Intake w/ rubber ITR intake arm and Spoon drop-in filter
More to come in the next few weeks
#1163
Honda-Tech Member
Join Date: Jul 2010
Location: Central Florida, USA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Good luck with the job man, at least you're bringing home some dough for the project.
#1164
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
#1165
Honda-Tech Member
Join Date: Oct 2007
Location: happy ****ing valley
Posts: 2,992
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
nice intake setup, imo stock airbox always looks best in a clean bay. you going to use the oem "snorkel" with that?
#1166
Honda-Tech Member
Join Date: Feb 2010
Location: My girlfriend is Taylor Swift, CA
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I always loved the visor look. They are really expensive though, but I think its worth it. I just wish the Integra visors were bigger, like the EJ1's.
#1167
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I might pick a set up once I get the car all done, but right now its time to prioritize and get this bish done
#1168
Honda-Tech Member
Join Date: Dec 2009
Location: COLORADO
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
just looked thru this whole thing in one sitting, my eyes are a burning but man i was, and am excited to see how it turns out thus far... amazing... and i now know a lot of corners not to cut, thanks for all the pictures, cant wait to see more
#1169
Honda-Tech Member
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
wow went through all pages , awesome build, great motivation to do work on mime
#1171
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Thanks homie. pm'd you back man
Still no progress on the car but i got some more stuff coming and got a couple little things for the car.
Got a ton of new hardware for the bay. Little different than most of the bolt kits. Not going to run any beauty washers, just standard stainless or black bolts and washers
New fender, headlight, rad stay and front bumper garnesh hardware so far
Had to have a couple things machined
The e-brake button needed to be shortened a tiny bit cuz It was a little long for my taste
Luckily it was threaded almost all the way down. Should fit nice and snug now
Also had to modify the LHT master cylinder brace a little bit.
Before you can see it is strictly 1 mounting spot only
After. The holes were a little too low on the brace causing it to not line up with the master very well, so I just had it machined drilled to be height adjustable
Just needs powder coat and some new hardware and it will be fresh
Off all day today and gettin up earlyish to put in some work so be on the look for more updates
#1174
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Haha I know. I want some black dc5 recaros bad so I'm lookin out for those, but the red srd's are sentimental lol. I got em on the super low from a homie when I was first gettin the car built up. It was my first set of legit seats and I'll probly just end up usin em while I save for the dc5's. Who knows I might end up tradin em but for now I'm gonna rock em
lol more to come soon!
lol more to come soon!