Where to tap oil pan (searched)
05-02-2007, 04:38 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Gatineau, Quebec, Canada
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Where to tap oil pan (searched)
IIRC, there's a thread on here that shows the best place to tap the OEM oil pan for the oil return line for turbo applications. Problem is, I've used the search feature but was unable to find the said thread. Can someone link me to that thread, or tell me where I can tap the oil pan?
Any help would be greatly appreciated. Thanks.
Any help would be greatly appreciated. Thanks.
05-02-2007, 06:00 AM
#2
Honda-Tech Member
Join Date: Mar 2006
Location: mile high, Co, USA
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to tap oil pan (ImPuLsIvE)
i tapped mine on the un sumped side. that was the only place i could fit mine plus it was a straight dump from the turbo. look through the forced induction thread and im sure you'll find it
05-02-2007, 06:04 AM
#3
Honda-Tech Member
Join Date: Apr 2006
Location: dirty jerzzzz
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to tap oil pan (nonvteclude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonvteclude »</TD></TR><TR><TD CLASS="quote">i tapped mine on the un sumped side. that was the only place i could fit mine plus it was a straight dump from the turbo. look through the forced induction thread and im sure you'll find it</TD></TR></TABLE>
x2
mine was originally in the deep section of the pan, til i bolted my downpipe on and realized this blocked the return line fitting. had that welded back up, and put it in the shallow portion of the pan
x2
mine was originally in the deep section of the pan, til i bolted my downpipe on and realized this blocked the return line fitting. had that welded back up, and put it in the shallow portion of the pan
05-02-2007, 06:27 AM
#4
Junior Member
Re: Where to tap oil pan (ImPuLsIvE)
Thread
Thread Starter
Forum
Replies
Last Post
