skyvang

i have ran out of idea and broken all my big wrench and other tools..i was wonder is there any way i could open this crank pulley bolt?

kp

Impact gun and a torch.

thi3v3z

you could buy the $40 tool and it will come right off with an air impact.

parce85

3/4 impact gun will take it off with hardly any effort

1992Si

Or take it to a shop and have them remove it and give the guy $10.00

skyvang

thanks for the help....i took to the shop and there impact gun are too weak and other shop charge me $85 and its not %100 sure they going to open it.....i guess i'm screw heeh

Anton LaVey

or you could try to remove the bolt instead of trying to open it hahahah

93preludeh22

Go to a place that works on big trucks.. they'll be able to get it off no problem

philosofy1

I know it's not the best or recommended way, put you can put a screwdriver at the flywheel then try to remove the bolt. Again, it's not the best way being that it can damage the teeth on the flywheel, but it might get the job done.

shawn_crx

impact guns won't work. My bro-n-law accord had the same issues, took it to a shop that has 1000 ft lbs guns, and still won't work. Then we took it to a honda repair shop and they raise the car up and use a 3/4 breaker bar with a long cheater on it. "Bingo"
donate 40 to the 1000 ft lbs gun shop for his tries
The honda shop did it for free.... :-)

skyvang

thanks for helping me out....

lponcian5799

torch, breaker bar, and beer.

EGR95

try a long pipe or use ur legs it work with me.

Rok_Stok

You need an impact wrench, it took a huge Blue Point to get mine off.

TheJGB3

I was taught to ALWAYS use the RIGHT TOOL FOR THE JOB!!



Powerbuilt 648796

buy it here for $24.99
http://www.amazon.com/Powerbuilt-648...8316488&sr=1-1

Rok_Stok

The 2-year lab, here at Pitt State, couldn't find that part, so us in the 4-year lab just did it with a big impact. But you're right, if you have the option of using the right tool, then use it.

skyvang

thanks for the help, using a long pipe and use my feet is a good idea but since the dang bolt is too tight, it either break my tools or bend my tools. this bolt is not a joke....i use my friend impact gun about 150 psi..still would not open it..i need a impact that could reach up to 200 psi or up......i guess i need to go and try to find a place where they work on big truck...do anybody know a name for repair shop for big truck?

instrument

yes, steves shop, but seeing we don't know what country/city/state you're in steve may not be close to you.........