Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine and Powertrain
- Honda Accord: How to replace your cat-back
Step by step instructions for do-it-yourself repairs.
Browse all: Engine and Powertrain
installing cat-back exhaust on a 92
#1
Thread Starter
Join Date: Nov 2004
Location: stallings, nc, usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
installing cat-back exhaust on a 92
i am trying to install my obx cat-back exhaust on my 92 accord but i can not break the bolts loose bc they are the original bolts and exhaust i was wondering is there anyway i can break them loose or would i have to cut them off and would that hurt anything on my catalytic converter
#2
Re: installing cat-back exhaust on a 92 (hndracng)
You used a breaker bar by chance? Some times a good tug with a long breaker bar is all it needs. If you have but still cant, a grinder to cut the bolt off might be needed.
#4
Join Date: Jul 2003
Location: y0 mamas house, ohhhh points and laughs
Posts: 2,537
Likes: 0
Received 0 Likes
on
0 Posts
Re: installing cat-back exhaust on a 92 (hndracng)
spray some jb-80 or wd-40 or PB blaster on those bolts, let em soak for a lil bit, and take an impact gun to those suckers
#5
Thread Starter
Join Date: Nov 2004
Location: stallings, nc, usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: installing cat-back exhaust on a 92 (FatJoe)
ok what if i dont have an impact gun and also what if the bolts are rounded out already from where someone previously screwed it up what would you recommend then
#6
Farts in the shower
Join Date: Jun 2003
Location: Colorado
Posts: 15,559
Likes: 0
Received 0 Likes
on
0 Posts
Re: installing cat-back exhaust on a 92 (hndracng)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hndracng »</TD></TR><TR><TD CLASS="quote">ok what if i dont have an impact gun and also what if the bolts are rounded out already from where someone previously screwed it up what would you recommend then</TD></TR></TABLE>
Torch to heat the bolt and use vise grips to get them out or cut them...then replace with grade 8 bolts or take it to a exhaust shop to have them take out the tough bolts.
Torch to heat the bolt and use vise grips to get them out or cut them...then replace with grade 8 bolts or take it to a exhaust shop to have them take out the tough bolts.
Thread
Thread Starter
Forum
Replies
Last Post
GSRaCeRbOI
Acura Integra
12
07-24-2002 10:07 AM