D Series - where do i hook a chain to pull the motor out? - Honda-Tech


D Series - where do i hook a chain to pull the motor out?

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 08-22-2011, 02:03 PM   #1
Honda-Tech Member
Thread Starter
 
Bipolarcivic's Avatar
 
Join Date: Sep 2010
Location: Alabama
Posts: 76
Icon2 D Series - where do i hook a chain to pull the motor out?

I'm swapping my D15 for a D16. My problem is where do i hook a chain to pull the motor out? There is no plates where your supposed to hook to ?
Bipolarcivic is offline   Reply With Quote
Old 08-22-2011, 02:15 PM   #2
Honda-Tech Member
 
hafast's Avatar
 
Join Date: May 2011
Location: Thunder Bay, Ontario, Canada
Posts: 59
Default Re: D Series - where do i hook a chain to pull the motor out?

You can always thread a bolt into somthing and attach the chain, I did on the side of the motor and one on the thermo housing it worked fine. Every situation is different.
hafast is offline   Reply With Quote
Old 08-22-2011, 02:18 PM   #3
Honda-Tech Member
 
Join Date: Mar 2011
Posts: 6
Default Re: D Series - where do i hook a chain to pull the motor out?

Bolts, such as the ones that garb the transmission and motor, just make sure they are threaded enough that they can handle the motor.
ogarcEM1 is offline   Reply With Quote
Old 08-22-2011, 02:27 PM   #4
Honda-Tech Member
 
sk8kingda3rd's Avatar
 
Join Date: Jun 2009
Posts: 94
Default Re: D Series - where do i hook a chain to pull the motor out?

I used the top bolt on the power steering pump bracket and one of the tranny mount bolts. Worked like a dream.
sk8kingda3rd is offline   Reply With Quote
Old 08-22-2011, 02:28 PM   #5
Honda-Tech Member
 
Join Date: Aug 2011
Location: Vancouver island
Posts: 16
Default Re: D Series - where do i hook a chain to pull the motor out?

It may have been bad but it worked, I threaded a bolt into the side of the head behind the alternator and used the bracket on the trans that holds the hose for the slave cylinder (slave cylinder was not attached at the time)
Stonecoldn69 is offline   Reply With Quote
Old 08-22-2011, 03:39 PM   #6
Honda-Tech Member
Thread Starter
 
Bipolarcivic's Avatar
 
Join Date: Sep 2010
Location: Alabama
Posts: 76
Default Re: D Series - where do i hook a chain to pull the motor out?

ok, i did not know if the threads would hold the weight of the motor being aluminum motor and all but thanks everyone!
Bipolarcivic is offline   Reply With Quote
Old 08-22-2011, 07:12 PM   #7
Honda-Tech Member
 
strategy400's Avatar
 
Join Date: Dec 2007
Location: Victorville, CA, USA
Posts: 1,117
Default Re: D Series - where do i hook a chain to pull the motor out?

I usually hook a chain up at 3 points, the top PS pump bracket bolt, then a bolt on the opposite side of the head next to the intake mani (I think I thread one of the frame-to-front-bumpstop-mount bolts in there). Then depending on if you're hoisting the engine only or engine + trans:

Engine only - One of the lower distributor bolt holes with a distributor bolt.

Or:

Engine + trans - There's a steel bracket on top of the trans.





BTW I recommend leaving that rear trans mount on the chassis and loosening the 3 bolts from the engine/trans.
strategy400 is offline   Reply With Quote
Old 08-23-2011, 04:26 PM   #8
Honda-Tech Member
 
Join Date: Mar 2011
Posts: 6
Default Re: D Series - where do i hook a chain to pull the motor out?

Quote:
Originally Posted by hafast View Post
You can always thread a bolt into somthing and attach the chain, I did on the side of the motor and one on the thermo housing it worked fine. Every situation is different.
ive done the same
RomeroVIP is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
HOIST POINTS FOR REMOVAL HELP Lespaul59 Honda Civic / Del Sol (1992 - 2000) 3 03-18-2016 03:40 AM
D15B1, where to hook up sling to pull the engine out of the car Yuta Honda CRX / EF Civic (1988 - 1991) 2 11-01-2015 08:20 PM
where to put chains when lifting a B series motor MI4$DC5 Honda Civic / Del Sol (1992 - 2000) 5 09-30-2006 07:17 AM
where to bolt the engine hoist chain on d16z6 motor? SOHC_Brian Honda Civic / Del Sol (1992 - 2000) 7 05-19-2004 07:35 PM
pulling motor-where to attach chain? johnzm Honda CRX / EF Civic (1988 - 1991) 4 07-26-2002 10:01 AM


Tags
accord, attach, brackets, chain, chains, civic, d15, d16, engine, honda, hook, motor, pull, pulling, tech

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 04:09 AM.



Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.