Boost By Gear Question
#26
Honda-Tech Member
#28
Honda-Tech Member
Join Date: May 2008
Location: Southern Oregon
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
#30
Honda-Tech Member
Join Date: May 2008
Location: Southern Oregon
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
Re: Boost By Gear Question
#31
Honda-Tech Member
#32
Honda-Tech Member
Re: Boost By Gear Question
So im gona guess the quick spool setuo is way more effective than a mbc. Due to the fact of being able to hold the wastegate completely closed. I didnt think MBCs held wastegate closed that much.
Lightning teg, thanks for the write up
So is the four port more responsive or what. Looks like xenocron has two different four ports, and a three port.
Lightning teg, thanks for the write up
So is the four port more responsive or what. Looks like xenocron has two different four ports, and a three port.
Last edited by ls joker; 06-19-2016 at 05:36 AM.
#33
Honda-Tech Member
Re: Boost By Gear Question
the four port is used to have a wider range of boost control, 3 ports were good for 2-3x your spring pressure whereas a 4 port is good for 4x or more
the 4 port has the ability so route pressure above the wastegate spring as well as below it, which my wastegate supports and seems like an advantage
Im getting about 4x out of mine havent needed any more then that just yet.
call up b&r fittings he was working on getting a newer mac valve I beleive its more responsive that was earlier this year he should have them now
the 4 port has the ability so route pressure above the wastegate spring as well as below it, which my wastegate supports and seems like an advantage
Im getting about 4x out of mine havent needed any more then that just yet.
call up b&r fittings he was working on getting a newer mac valve I beleive its more responsive that was earlier this year he should have them now
Thread
Thread Starter
Forum
Replies
Last Post
DamonBoost
Forced Induction
9
11-22-2001 01:14 PM