4K RPM Stall
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: Los Angeles, CA, U.S.
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
4K RPM Stall
Okay so the otherday i was on my way home and my check engine light came on so i was like WTF !? now my car wont pass 4k RPM and the check engine light goes away after a while and the tends to turn back on. I have to turn my car off at a stop 2 pass 4k. Any idea what this bugg is ? (K20A3) EP3
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: Los Angeles, CA, U.S.
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4K RPM Stall
Yeah some guy told me his FG had gone into Limp Mode but it went away .
Ima throw in my scanner right now and post the codes it had right now brb.
Ima throw in my scanner right now and post the codes it had right now brb.
#7
Honda-Tech Member
Re: 4K RPM Stall
check your gas cap, if its not sealing, you fuel pump can not get the right fuel pressure=limp mode. While you are at it, check your oil level, that gets to low and the motor will go into limp mode. After you find the problem, with the key off, pull the ecu fuse from the box under the hood, this will reset your ecu.
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: Los Angeles, CA, U.S.
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4K RPM Stall
Ummm so this is what i did to take care of my Limp Mode Status ......... Changed my oil to Mobil Clean 5000, New NGK Iridium Spark Plugs.Got a new gas cap of an RSX. Cleaned my fuel Injectors. New Oil Filter. and reseted my ECU how my freind here told me ^_^
RUNS GREAT ! NO MORE 4K STALLING and i-VTEC kickis in HARD YO !
lol
Thanks alot guys .
RUNS GREAT ! NO MORE 4K STALLING and i-VTEC kickis in HARD YO !
lol
Thanks alot guys .
#10
Function > Form
Re: 4K RPM Stall
Damn, you got a EP right? I'm glad you got your car figured out, but tell me this, when does your vtec kick in hard? Or was that a joke seeing how you have an A3 and all...
#14
Honda-Tech Member
Re: 4K RPM Stall
The I-VTEC in the k20a3 is not much to brag about. You only have the extra cam lobes on the intake side and it "kicks in " at 2200 rpm....you see, the k20a3 runs on one intake valve per cyclinder till 2200 rpm and then the vtec starts using the other intake valve.....so if you drive a k20a3, vtec is kinda a bad joke.
#17
Junior Member
Join Date: Oct 2006
Location: Endwell, NY, United States
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4K RPM Stall
I would think that resetting the ECU probably got rid of the limp mode, and would have even before you did all of the maintenance items.
P1259 is "VTEC System Malfunction." (According to a google search) I don't think the gas cap helped you at all.
Either way, all of the maintenance you did probably made it run better.
P1259 is "VTEC System Malfunction." (According to a google search) I don't think the gas cap helped you at all.
Either way, all of the maintenance you did probably made it run better.
#19
Junior Member
Join Date: Oct 2008
Location: Stanton, CA, USA
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4K RPM Stall
Ummm so this is what i did to take care of my Limp Mode Status ......... Changed my oil to Mobil Clean 5000, New NGK Iridium Spark Plugs.Got a new gas cap of an RSX. Cleaned my fuel Injectors. New Oil Filter. and reseted my ECU how my freind here told me ^_^
RUNS GREAT ! NO MORE 4K STALLING and i-VTEC kickis in HARD YO !
lol
Thanks alot guys .
RUNS GREAT ! NO MORE 4K STALLING and i-VTEC kickis in HARD YO !
lol
Thanks alot guys .
Changing your oil would do the trick, but you have to think why you were low on oil???
Thread
Thread Starter
Forum
Replies
Last Post