Krayzielix

i just changed my axle..n now my abs light comes on anyone know why is there a difference n abs n non abs axles..will this effect my braking or anything?
btw 99 gsr abs

teg97

iTrader: (3)

the abs axle will have a ring on the outer axle shaft and thats what abs spped snsr reads. this will affect your abs unit and it will not work properly if it doesn't read the one axle

Dogginator

Pull the ABS codes like you would a CEL (see the FAQ thread). It could be the axle or it could be a coincindental problem. Look for the cog ring on the axle.

Krayzielix

axle is already installed..so i dont have abs now?how do u pull an abs code..

Dogginator

From the Integra forum FAQ thread:

https://honda-tech.com/zerothread?id=978933

Just read the ABS light for the codes.

nWilk666

question about pulling abs codes. when i go to pull the code i have a cel on too, so all it does is bling the cel not the abs, how would i go about getting the abs to flash?

Dogginator

If there are stored CEL and ABS codes, they both should blink their codes.

nWilk666

well its a solid abs light on any ideas?

Dogginator

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nWilk666 &raquo;</TD></TR><TR><TD CLASS="quote">well its a solid abs light on any ideas?</TD></TR></TABLE>

That usually means that there are no stored codes. Is the ABS light on constantly while driving or does it blink every once in a while? The ABS computer may be the culprit.

nWilk666

constantly on but every now and then it will go off but soon as i step on the brakes.. its back

Dogginator

You can try to clear the ABS memory by pulling the underhood fuses near the ABS modulator. See if the light returns and try to pull the codes again.