94 Ls odometer doesn't work. Everything else does
10-28-2012, 09:47 AM
#26
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: 94 Ls odometer doesn't work. Everything else does
Google is your friend... http://www.google.ca/search?q=94+int...L4GIiwK5iIHIAQ 94
10-28-2012, 11:06 AM
#27
Re: 94 Ls odometer doesn't work. Everything else does
hot damn. there ya go. at your fingertips.
i guess a case of beer could have even bought a haynes manual. which, although not the optimal manual, would have sufficed.
now you can go through and test for continuity between the vss and cluster for starters
actually, check your vref and reference ground at the vss first
as mentioned previously, a multimeter will be required
i guess a case of beer could have even bought a haynes manual. which, although not the optimal manual, would have sufficed.
now you can go through and test for continuity between the vss and cluster for starters
actually, check your vref and reference ground at the vss first
as mentioned previously, a multimeter will be required
10-28-2012, 11:11 AM
#28
Re: 94 Ls odometer doesn't work. Everything else does
check all your fuses first too. use the test light for that. under hood and in cabin.
although it's unlikely to be a fuse. since the problem was first intermittent
although it's unlikely to be a fuse. since the problem was first intermittent
10-28-2012, 11:21 AM
#29
Re: 94 Ls odometer doesn't work. Everything else does
also forgot to mention that since the circuit goes through the ecm, you must test continuity in 2 parts so the ecm can be disconnected. otherwise damage to the ecm could occur. so look at the configuration of the circuit to determine where your test points will be
10-31-2012, 09:56 AM
#31
Honda-Tech Member
Thread Starter
Re: 94 Ls odometer doesn't work. Everything else does
Ok I looked at that wiring diagram, I can't read Chinese. 
but nah, I'm not understanding it. I cut the plug that goes to top of sensor and ran the 3 wires directly to the sensor. The plug was a lil corroded and I couldn't get into the pins well enuf to clean it so I cut it off. Just trying to figure out problem. I'll replace the plug later. But it still does not work. I unplugged ecu, turned ignition to on position, and the sensor is getting power. As well as a good ground. I'm gonna attempt ANOTHER known working sensor...just wanted to update this.... 
smdh
but nah, I'm not understanding it. I cut the plug that goes to top of sensor and ran the 3 wires directly to the sensor. The plug was a lil corroded and I couldn't get into the pins well enuf to clean it so I cut it off. Just trying to figure out problem. I'll replace the plug later. But it still does not work. I unplugged ecu, turned ignition to on position, and the sensor is getting power. As well as a good ground. I'm gonna attempt ANOTHER known working sensor...just wanted to update this.... smdh
Thread
Thread Starter
Forum
Replies
Last Post
andyb52182
Honda Civic / Del Sol (1992 - 2000)
2
08-31-2008 09:40 PM