95 si
engine : 98 jspec b18c

will my d16z6 vtec control unit (thingy) fit on the b18c?

a very knowledgable friend says yes. and i just wanted to know if anyone has done this

thanks

btw code 22 is no vtec pressure signal (jdm itr engine has no vtec pressure sensor)

thanks


edit im using a jun chipped p28 and a stock p28



Modified by yayaRl337 at 10:34 PM 5/17/2003

 

oh id like to add that i give Hmotorsonline an 8 out of 10 on the engine....it had a few problems, but no broken parts and it runs really good

 

you can either tap into your jdm vtec solenoid and run 2 wires, one for pressure switch and one for ground.

or you can get a USDM Vtec solenoid.

 

are they all the same? the whole vtec unit?

will my d16z6 one work?

 

BUMP
cmon guys

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jonas &raquo;</TD></TR><TR><TD CLASS="quote">you can either tap into your jdm vtec solenoid and run 2 wires, one for pressure switch and one for ground.

or you can get a USDM Vtec solenoid. </TD></TR></TABLE>

the vtec soleniod is one wire.....tap that wire and any ground to the pressure sensor plug?

 

drill the jdm vtec solenoid and run the wires and save yourself $150 thats what i did and it works fine

 

i put the d16z6 unit on the b18....

just so you all know

 

take your harness and tie the wires together going to the pressure switch. Cheap and effective