So we got the motor and trans in and now i need vtec. I have the P28 that i used with my single cam motor on this setup. I need to know where to put my vtec wire and pressure wire? where can i find a diagram?

The motor is from a 2000 civic Si and i had a D16y7. It has the OBD1 conv harness and the P28. the program is crome and its just a basic tune. I plan on going hondata route and heading to the dyno soon so i wanna get that vtec hooked up.

Thanks guys!!!

 

You should be wiring VTEC to the conversion harness, not the ECU. When you're using a conversion harness, you treat it like it's the stock plug.

Here's a diagram to help you out:

OBD2A Pinout --

 

where the wires are suppose to go into the harness is empty. where can i get the little connectors?

 

if you have a junkyard nearby, go in there an snip the ecu connector plugs off any ek. either that, hope you got a spare junk harness.. dont forget to relocate the IAC pinouts


Modified by B20Monster at 12:39 PM 10/24/2007

 

obd1 and obd0 harnesses use those pins as well. also, some random plugs may use it. depin some male plugs you may have laying around and see if those pins fit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ZUL8R &raquo;</TD></TR><TR><TD CLASS="quote">So we got the motor and trans in and now i need vtec. I have the P28 that i used with my single cam motor on this setup. I need to know where to put my vtec wire and pressure wire? where can i find a diagram?

The motor is from a 2000 civic Si and i had a D16y7. It has the OBD1 conv harness and the P28. the program is crome and its just a basic tune. I plan on going hondata route and heading to the dyno soon so i wanna get that vtec hooked up.

Thanks guys!!!
</TD></TR></TABLE>

eran already has posted a diagram, but i hope the links i have provide help just as much if not more!

this is for wire removal from the harness.
http://www.ff-squad.com/tech/w...l.jpg

shock tower
http://www.ff-squad.com/tech/w...g.jpg

VTEC wiring (ECU pinouts)
http://www.ff-squad.com/tech/w...5.jpg

 

Thanks Guys!!! I'll get started

heres the old setup



And the new setup



SAy BYE

Modified by ZUL8R at 4:45 PM 10/24/2007


Modified by ZUL8R at 4:46 PM 10/24/2007