i heard that most of the calculations on c-speed is accurate except the pct pistons. i want around 11:1 on the b16a (sir-2). i get 11.006336273672834 from the 1 layer head gasket. does anyone know if this is referring to the oem head gasket? if so, is this reliable? is anyone using a 1 layer oem head gasket on their b16 with no problems?

 

https://honda-tech.com/zerothread?id=717928

all the info you need on the topic.

it takes time but its worth it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nissanjon &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=717928

all the info you need on the topic.

it takes time but its worth it.</TD></TR></TABLE>

i've gone through that thread many times but it doesn't corcern my question. i'm trying to find the easiest, most reliable way to achieve around 11:1 compression on a b16a (sir-2). my other choice would be milling the head but i wanted to know if the 1 layer head gasket will do the job. thanks

 

bump

 

i think the c speed compression calculator becomes right when you put the right ptd height, i think its 0