if i want to swap a 98 LS engine in my 97 hatch, what mounts will i need, im assuming i need 00si mounts, but do i need all of them, the swap is coming with the mounts from the Ls

i do believe that you can use the stock civic mounts. i had a 00 civic hatch and i put a 98 ls in it and i used the same mounts.

All B series motors and trannys bolt right into any 96-00 civic hacthback, coupe, or 4 door. And same goes for the Integras between the years of 90 ,I believe, and 01. And I'm pretty sure the same thing goes for all eg's.

and 92-95 do the same also.

For all 96-00 EK Civic's:

* 99-00 Si driver's side mount bracket then reuse your stock EK rubber mount.
* 99-00 Si rear mount bracket then reuse your stock EK rubber mount.
* Stock EK upper tranny mount.
* 99-00 Si or 94-01 Integra lower front tranny dampening bracket then reuse your stock EK rubber end mount.
* Del Sol VTEC A/C bracket (to retain A/C) or any 94+ B-series bracket if being used only for the dampening mount then reuse your stock EK rubber end mount.