Honda-Tech - Honda Forum Discussion
The black plug connects to the projector housing.
The black plug connects to the projector housing.
0 2023/04/28 13:21:18
But the terminals and their plug are not going to match up with the H4 relay harness. Oh noes!
But the terminals and their plug are not going to match up with the H4 relay harness. Oh noes!
0 2023/04/28 13:21:10
Here are the connectors off the ignitor for the bulb.
Here are the connectors off the ignitor for the bulb.
0 2023/04/28 13:07:32
Time to look at the bulbs. They are very carefully packaged.
Time to look at the bulbs. They are very carefully packaged.
0 2023/04/28 13:07:19
It looks like some extra connections with the bulbs.
It looks like some extra connections with the bulbs.
0 2023/04/28 13:07:07
Bulb connected to the ignitor.
Bulb connected to the ignitor.
0 2023/04/28 13:06:53
Bottom connection is the relay harness plugging into the ballast.
Bottom connection is the relay harness plugging into the ballast.
0 2023/04/28 12:53:47
I stretched everything out. This is one leg. There are two legs, one for each headlight.
I stretched everything out. This is one leg. There are two legs, one for each headlight.
0 2023/04/28 12:53:34
Connector - I assume this plugs into the factory H4 plugs where the halogens plug in?
Connector - I assume this plugs into the factory H4 plugs where the halogens plug in?
0 2023/04/28 12:53:21
Power lead has an inline fuse holder equipped w/ a 20A fuse.
Power lead has an inline fuse holder equipped w/ a 20A fuse.
0 2023/04/28 12:53:11
This is the ignitor. This plugs into the ballast, and then plugs into the bulbs.
This is the ignitor. This plugs into the ballast, and then plugs into the bulbs.
0 2023/04/28 08:26:08
This is the ballast - there are 2. These connect to the relay harness and the ignitors.
This is the ballast - there are 2. These connect to the relay harness and the ignitors.
0 2023/04/28 08:25:57
This is the H4 relay harness. When I placed my order at TRS, I got a message saying this was on backorder. Then I got a message saying they could substitute with this one.
This is the H4 relay harness. When I placed my order at TRS, I got a message saying this was on backorder. Then I got a message saying they could substitute with this one.
0 2023/04/28 08:25:46
I thought I could mount the halo relay in the housing - behind the reflector bowl.
I thought I could mount the halo relay in the housing - behind the reflector bowl.
0 2023/04/28 08:02:36
To maximize the lead length after the housing, I will clock the halo to put the wiring close to the city light opening.
To maximize the lead length after the housing, I will clock the halo to put the wiring close to the city light opening.
0 2023/04/28 08:02:28
Then I realized if I did that I would lose all this length of the lead off the halo. The relay will have to mount behind the housing somewhere under the hood.
Then I realized if I did that I would lose all this length of the lead off the halo. The relay will have to mount behind the housing somewhere under the hood.
0 2023/04/28 08:02:19
Test fit of the halo on the shroud.
Test fit of the halo on the shroud.
0 2023/04/28 07:53:48
The halos have loops to secure them to the shroud.
The halos have loops to secure them to the shroud.
0 2023/04/28 07:53:42
The wiring off the back of the halo will not allow it to mount flat on the shroud.
The wiring off the back of the halo will not allow it to mount flat on the shroud.
0 2023/04/28 07:53:36
The bare shroud - there are no provisions to mount halos on these.
The bare shroud - there are no provisions to mount halos on these.
0 2023/04/28 07:53:29
More detail of the wiring.
More detail of the wiring.
0 2023/04/28 07:53:21
The halo and associated relay. They don't look to be from Morimoto.
The halo and associated relay. They don't look to be from Morimoto.
0 2023/04/28 07:50:31
Detail of the connector between the halo and relay.
Detail of the connector between the halo and relay.
0 2023/04/28 07:50:25
Better lighting, and showing the length of the leads off the halo.
Better lighting, and showing the length of the leads off the halo.
0 2023/04/28 07:50:18
0 2023/04/18 11:26:45
I thought these slots were how you adjust the headlights.
I thought these slots were how you adjust the headlights.
0 2023/04/18 11:13:20
How to use these adjusting screws for the reflector bowl?
How to use these adjusting screws for the reflector bowl?
0 2023/04/17 07:53:06
0 2023/04/17 07:52:57
0 2023/04/17 07:52:46
0 2023/04/17 07:52:36
0 2023/04/12 17:54:44
All the pieces:
All the pieces:
0 2023/04/12 17:37:31
The Moto Holder and lock ring need to come off.
The Moto Holder and lock ring need to come off.
0 2023/04/12 17:37:19
H4 gasket goes on.
H4 gasket goes on.
0 2023/04/12 17:37:11
I ran the high/low wires through the city light opening in the reflector bowl.
I ran the high/low wires through the city light opening in the reflector bowl.
0 2023/04/12 17:37:02
Make sure gasket looks good.
Make sure gasket looks good.
0 2023/04/12 17:36:55
Place H4 adapter.
Place H4 adapter.
0 2023/04/12 17:36:47
Tighten lock ring!
Tighten lock ring!
0 2023/04/12 17:36:38
This shield is in the way of the projector.
This shield is in the way of the projector.
0 2023/04/12 17:33:40
Shield and bulb holder unscrew from the back:
Shield and bulb holder unscrew from the back:
0 2023/04/12 17:33:31