Honda-Tech - Honda Forum Discussion
More good stuff! I’m pretty happy with this brand. These are Japanese made parts and they seem OEM really.
More good stuff! I’m pretty happy with this brand. These are Japanese made parts and they seem OEM really.
0 2020/12/27 21:19:07
I recorded while welding. This falling glob of molten metal.. is why my screen is cracked.
I recorded while welding. This falling glob of molten metal.. is why my screen is cracked.
0 2020/12/27 21:18:56
Working on mocking up so I can weld this bar across which will be a mounting point for the rear diff.
Working on mocking up so I can weld this bar across which will be a mounting point for the rear diff.
0 2020/12/27 21:18:49
Some OEM thingss. I replaced the steering rack with an OEM (manual) one after 2-3 bad parts store racks. So you can see some new boots here for that, and misc other goodies.
Some OEM thingss. I replaced the steering rack with an OEM (manual) one after 2-3 bad parts store racks. So you can see some new boots here for that, and misc other goodies.
0 2020/12/27 21:18:43
Working on figuring out the right shims for the rear diff.
Working on figuring out the right shims for the rear diff.
0 2020/12/27 21:18:37
This is WAYY too long.
This is WAYY too long.
0 2020/12/27 21:18:34
Much better. :)
Much better. :)
0 2020/12/27 21:18:31
Snip grind weld.
Snip grind weld.
0 2020/12/27 21:18:25
I made this tool to measure bearing preload for the front diff.
I made this tool to measure bearing preload for the front diff.
0 2020/12/27 21:18:18
Front LSD! It’s a gearX LSD.
Front LSD! It’s a gearX LSD.
0 2020/12/27 21:18:12
0 2020/12/27 21:18:06
Front LSD side bearings (mostly for PN reference)
Front LSD side bearings (mostly for PN reference)
0 2020/12/27 21:17:59
0 2020/12/27 21:17:53
Stoptech braided lines and Hawk HPS front/rear pads, Brembo Blanks for front and rear.
Stoptech braided lines and Hawk HPS front/rear pads, Brembo Blanks for front and rear.
0 2020/12/27 21:17:48
Stoptech braided lines and Hawk HPS front/rear pads
Stoptech braided lines and Hawk HPS front/rear pads
0 2020/12/27 21:17:42
Insane shaft 500 HP rear axles.
Insane shaft 500 HP rear axles.
0 2020/12/27 21:17:38
Rear diff mounted! I had to cut out a section of the subframe and bang up the floor. The sad part is a spare tire can no longer be mounted due to the floor being banged up to allow for the rear diff to sit in place.
Rear diff mounted! I had to cut out a section of the subframe and bang up the floor. The sad part is a spare tire can no longer be mounted due to the floor being banged up to allow for the rear diff to sit in place.
0 2020/12/27 21:17:31
I am a lizard person.
I am a lizard person.
0 2020/12/27 21:17:26
0 2020/12/27 21:17:23
This is the speedfactory I had mentioned. It’s main purpose is to convert from metric to SAE where it’s required.
This is the speedfactory I had mentioned. It’s main purpose is to convert from metric to SAE where it’s required.
0 2020/12/27 21:17:17
Shot of the chewed GSR 3rd gear set.
Shot of the chewed GSR 3rd gear set.
0 2020/12/27 21:17:09
Mfactory LSD for the rear! :) This is the LSD used on a b000 D series transmission.
Mfactory LSD for the rear! :) This is the LSD used on a b000 D series transmission.
0 2020/12/27 21:17:04
0 2020/12/27 21:16:57
When I thought of putting an LSD In the rear I realized I have no clue about that stuff. This image was pulled from a factory Service manual PDF for the wagon, ha!
When I thought of putting an LSD In the rear I realized I have no clue about that stuff. This image was pulled from a factory Service manual PDF for the wagon, ha!
0 2020/12/27 21:03:54
Here are the parts suggested for the driveline rebuild. They are to be used with speedfactory’s adapter/spacer kit.
Here are the parts suggested for the driveline rebuild. They are to be used with speedfactory’s adapter/spacer kit.
0 2020/12/27 21:03:51
Woo! Made a battery tie down. The one that came in this kit was a POS, although I can not recall why.
Woo! Made a battery tie down. The one that came in this kit was a POS, although I can not recall why.
0 2020/12/27 21:03:44
..
..
0 2020/12/27 21:03:37
I wanted to retain a full exhaust. Keeping a full exhaust and also ground clearance is not easy when putting a driveline i place of the original exhaust as wel as using 3” piping. This imagine was found and on the web and was just to help me think.
I wanted to retain a full exhaust. Keeping a full exhaust and also ground clearance is not easy when putting a driveline i place of the original exhaust as wel as using 3” piping. This imagine was found and on the web and was just to help me think.
0 2020/12/27 21:03:22
This mock up was just to help get me thinking. The trans wasn’t all the way mated to the block even.
This mock up was just to help get me thinking. The trans wasn’t all the way mated to the block even.
0 2020/12/27 21:03:13
I found some info regarding upgrading the driveline.
I found some info regarding upgrading the driveline.
0 2020/12/27 21:03:01
I planned to use the GSR gear set in the CRV trans, since I’d need the gears from my GSR trans I didn’t want to repair it just to take it apart again, and that is what got the ball rolling on this. I bought this kit which enables you to use FWD gears in the CRV trans.
I planned to use the GSR gear set in the CRV trans, since I’d need the gears from my GSR trans I didn’t want to repair it just to take it apart again, and that is what got the ball rolling on this. I bought this kit which enables you to use FWD gears in the CRV trans.
0 2020/12/27 21:02:53
Da booty
Da booty
0 2020/12/27 21:02:50
0 2020/12/27 21:02:44
That’s right buddy. I had one inspiring phone call with a random Honda from dude and since, I’d been planning to go AWD some day. After breaking my trans again I decided I wasn’t going to repair it and then soon after drop the trans again to do AWD.
That’s right buddy. I had one inspiring phone call with a random Honda from dude and since, I’d been planning to go AWD some day. After breaking my trans again I decided I wasn’t going to repair it and then soon after drop the trans again to do AWD.
0 2020/12/27 21:02:37
Rear diff?! CRV trans?!?!
Rear diff?! CRV trans?!?!
0 2020/12/27 21:02:30
Driveline?!
Driveline?!
0 2020/12/27 21:02:23
0 2020/12/27 21:02:15
..
..
0 2020/12/27 21:01:57
Here is a cop running my vin after catching me trying to get into the second second story window of my sisters house when she wasn’t home. Backstory: I just moved from WA to OR. When I was in WA I registered in ID because no Cat. I had an expired temp Idaho registration in the window. I left OR and drove to Seattle to visit my sister but I didn’t call to tell her I was coming. I thought I’d break in and surprise her later lol. I did break it before the cops came. They didnt Believe my story lol.
Here is a cop running my vin after catching me trying to get into the second second story window of my sisters house when she wasn’t home. Backstory: I just moved from WA to OR. When I was in WA I registered in ID because no Cat. I had an expired temp Idaho registration in the window. I left OR and drove to Seattle to visit my sister but I didn’t call to tell her I was coming. I thought I’d break in and surprise her later lol. I did break it before the cops came. They didnt Believe my story lol.
0 2020/12/27 21:01:41
0 2020/12/27 21:01:33