YSK-1 Tranny Issues.
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2007
Location: Uniontown, PA, USA
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
YSK-1 Tranny Issues.
Well here what happen. Just got a 99 ej8 with a b18c swap in it with a 00 ysk-1 tranny in it.
Car wouldn't move cause the clutch was fried but still seem like it was going into the gear fine. Got new clutch kit in and flywheel cut, cleaned bell housing and then bolted everything back up. Pushed in the clutch started it up, held in the clutch while it was still in neutral and slowly let out and it was grabbing in neutral. It won't go into Reverse. Tranny seems like its stuck in first gear. Check the shift linkage and seemed like it was fine. Could it be the shift fork? Im stuck could anyone help me?
Car wouldn't move cause the clutch was fried but still seem like it was going into the gear fine. Got new clutch kit in and flywheel cut, cleaned bell housing and then bolted everything back up. Pushed in the clutch started it up, held in the clutch while it was still in neutral and slowly let out and it was grabbing in neutral. It won't go into Reverse. Tranny seems like its stuck in first gear. Check the shift linkage and seemed like it was fine. Could it be the shift fork? Im stuck could anyone help me?
Thread
Thread Starter
Forum
Replies
Last Post
Monarch
Honda Civic / Del Sol (1992 - 2000)
4
07-23-2002 12:52 PM