jonslam

in the midst of changing my input shaft bearing for the first time I got everything done easily until getting off the main shaft. I've removed the reverse shift holder and reverse idler shaft and everything else that needs to be removed. Ive been following a write up and all I have left to do is lift out the main shaft and all those goodies, but mine doesn't wanna come out at all I've been at it for 2 hours now. Wiggling it shaking it you name it.. what am I doing wrong or is there any tricks to help.

Thanks!

Aquafina

iTrader: (3)

B series remove the shift change piece, D remove the bolt from the shift arm and make sure the interlock guide bolt is out. If it still won't come out, tap it from the clutch side with a dead blow hammer.

jonslam

yeah I've removed everything for b series and still won't come out, I guess I'll try the dead blow hammer.