Da9 with s4c transmission issues (About to burn the MF)
#1
Da9 with s4c transmission issues (About to burn the MF)
Just swapped went from YS1 cable to S4C hydro no lsd trans. Run great when going straight but when turns it jerks and sometimes it goes with a clunk noise and slight...ouul to the side.
I'm using DA9 axles and synchro mesh fluid.
Axle were working fine with the YS1, the guy who I bought it is a good one I dont think he will sell me broke stuff.
Here are some videos of me trouble shooting let me know what you think.( joint cover is of to see the travel of the bearing )
https://youtu.be/BAHECvlNIH0
https://youtu.be/eNGp759Pe88
Any advice?
I'm using DA9 axles and synchro mesh fluid.
Axle were working fine with the YS1, the guy who I bought it is a good one I dont think he will sell me broke stuff.
Here are some videos of me trouble shooting let me know what you think.( joint cover is of to see the travel of the bearing )
https://youtu.be/BAHECvlNIH0
https://youtu.be/eNGp759Pe88
Any advice?
Last edited by Jan-DA; 08-10-2018 at 08:12 AM. Reason: Added link
Thread
Thread Starter
Forum
Replies
Last Post
CapnKrunch
Acura Integra
2
08-31-2010 08:34 AM
Gant
Acura Integra
8
08-19-2005 05:12 PM