I've googled, and searched here on honda tech, and cannot find a write up anywhere, for a Y1 Transmission. I need to replace the syncro's. Any one have any knowlage of where I can Find a very good write up? Id really appricate it. Im going to keep searching in the mean time.

 

Need something to study tonight

 

Look at the top of the forum.

https://honda-tech.com/zerothread/1649302

 

Yeah, already been their. Im not intreated in gears, I need info on how to remove the gears, and put syncro's in

 

a helm's manual is going to be your best bet. try these.

http://carfiche.com/manuals020/cars/

 

should I down load the 90-93 integra, Im sure that the crx one, is only for d-series

 

Any one can lead me to a page to help me,Or... I'll make a full write up on how to do it.

 

contact ........ in vtec

 

I seen his write up..But no Pics..damn. lol. I also PM'd him


Anyone else?

 

what tranny are you going to be redoing? hydro or cable? if it's cable, use 90-93 teg, and if it's hydro, use 94+ teg.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by full Circling &raquo;</TD></TR><TR><TD CLASS="quote">what tranny are you going to be redoing? hydro or cable? if it's cable, use 90-93 teg, and if it's hydro, use 94+ teg.</TD></TR></TABLE>

89-91 SiR Y1 cable


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .EnzoSpeed &raquo;</TD></TR><TR><TD CLASS="quote">It's not a task that requires a write-up, that's why you can't find one. Once you remove the trans housing, you'd have to be a retard to get stuck removing the synchros.</TD></TR></TABLE>

lol, Yeah, but I want to make sure I am going to do it right. Im not afraid to Dig into sh*t, But I dont want to somehow missplace a gear and get confused. It seems the gears just pull off.