Here is the setup.

f23a1 with 40 over pistons.
ported and polished head. decked 30
ss valves, crower regrind,maxbore 64mm tb
aem fuel rail, pressure regulator,v2 intake
dc header,
venom vcn2000 set at 100 shot,
hondata s200.

i talked to venom and they recommended 440s and a 35gph 80psi pump.

 

That would probably work,Im assuming the 35gph is an inline pump?

Id just go with an in-tank walbro. And with the Hondata you can control any sized injectors so you could always go bigger if your not sure...RC engineering website has an injector calculator that will tell you what you need. Check them

 

actually its an intank.Always heard that intank is better.