I own a 1989 honda integra xsi vtec. Recently my engine check light came on and since then vtec has not been working. My mechanic cannot figure out what is wrong, he has checked both my distributor and computer: both seeming to be fine. Any ideas on what is wrong with my teg?

 

check wiring frist, mybe put batt. plus to vtec spoll valve. start there just work your way throgh is dont forget the small easy things (does motor have oil) good luck!

 

whats the code that the check engine light is giving you?

 

When the mechanic ran the check on the light it came back with codes for ignition and the cam angle sensor. Im starting to think that the problem lies with wiring.

 

check your dizzy

 

Thats the thing, my mechanic sent my dizzy away for checking and it checked out all good. He even tested a new dizzy in my car and the prob was still there.

 

well, cam angle sensor is inside the dizzy so..
and you sayd code for ignition module? icm
thas inside the dizzy too

edit: have you messed with the wiring?


Modified by mmuller at 2:26 AM 12/13/2004