Who does Ecu chipping. I only want the chip. thanks.

Also. what revlimit and vtec crossover would you suggest for a B16a1 with CTR cams, titanium retainers, dual valve springs, TypeR intake manifold and 4-1 header.

 

I do.

1st gen PR3 ECU or PW0?

vtec at around 5200-5500rpm, rev limit at around 8600-8800

 

i can set you up with a good budy of mine who does them. he did my ecu and i have the same setup at you. he just put a modified mugen itr map into mine and i love it. pulls nice and strong and well priced. email me if you are interested. rustyskim@hotmail.com

 

pr3 how much for just the chip

 

Sup eg6ajk I was wondering If you could chip my p28 into an normal p72 odb1 gsr ecu. Because I am currently running on an p28 on my gsr. thanks u.

 

bump... what do you guys suggest as a revlimit.

CTR cams, titanium retainers, aftermarket valvesprings.

 

please email me for pricing: gtssport@yahoo.com
rev limit at around 8600-8800 for the B16A setup

as far as converting the P28 into P72 its never going to happen. the boards are not compatible. what you can do is run a chipped P28 that emulates ITR or GSR maps but you will still be missing a knock sensor and IAB control.

 

I do as well, but I can put whatever vtec x-over you want and whatever rev limiter you want plus I can supply the best EPROM maps to best blend withy our lsit of mods ...

PM me if you want ...

Greg

 

ok say i buy a chip,,,,
would i be able to install the chip in the ecu myself ,
do i have to solider or anything
?

 

yes you can install if you have soldering skills, otherwise let me do it for oyu, takes me 15 mins to reprogram and ecu if you're local ... if shipping requried you pay for express shipping and you can have it back next day.

if you can solder, I will sell chips and all you need to do it yourself for $100

greg

 

Also iH8RICERZ does ECU chipping...i bought a P28 chipped off of him its great! His site...